MHZ Mystic C5000 73" with twin 2028 12s

[Make-a-Wake]

Twin 2028's is bordering on Insane..................i have logged 8300 watts on my 2028............two would be around 22-23 horsepower!

The only motors I can think of that would be more "insane" would be twin Neu 2230's......................Possibly the Big Lehner 3080 as well.

[nata2run]

This is from a German site:
owner: Herrms
design: Pair a Dice
hull: HPR 233 CFK
engines: 2x LMT 3080/9
controller: 2x Schulze 40.160WK
lipos: 2x 12S4P Kokam 4000 30C
props: Octura X465
speed: 140 km/h

[nata2run]

Expect something like this : http://www.youtube.com/watch?v=7rvzYgF28JE

[srislash]

Twin 2028's is bordering on Insane..................i have logged 8300 watts on my 2028............two would be around 22-23 horsepower!

The only motors I can think of that would be more "insane" would be twin Neu 2230's......................Possibly the Big Lehner 3080 as well.

I went checking out Neu's site and the 2200 series should have something for you.http://www.neumotors.com/Site/2200_12_series.html

[jdfenn81]

Okay

After looking around this is the setup I think I am going to go with.

2 NEU 2230 725kv
4 6s 5000mah
2 fighter cat ESC 16s 400a
2 CR props from MHZ racing
2 Carbon motor mounts from MHZ racing
2 Direct drives from MHZ racing

[Pwb201]

That's awesome!! Great decision!! Not to change mind but have you looked at there line of scorpion motors? MHz has their own custom line that Really sweet. Might Evan be cheaper than nue, I have two sets in two different hulls of the 3026 which is the smallest version. And they are way under rated in power I'll say that confidently.. http://www.mhz-powerboats.com/mhzpow...4384f176b3d1b8
Well they might be cheaper if sold in states:)

[srislash]

Okay

After looking around this is the setup I think I am going to go with.

2 NEU 2230 725kv
4 6s 5000mah
2 fighter cat ESC 16s 400a
2 CR props from MHZ racing
2 Carbon motor mounts from MHZ racing
2 Direct drives from MHZ racing

Man this is going to be SAWEEET
While you're at FC you might want some of those 1.8 props.

[Make-a-Wake]

Okay

After looking around this is the setup I think I am going to go with.

2 NEU 2230 725kv
4 6s 5000mah
2 fighter cat ESC 16s 400a
2 CR props from MHZ racing
2 Carbon motor mounts from MHZ racing
2 Direct drives from MHZ racing

Going the el cheapo route i see.........................

Very nice components there.............What props? The 67xx series are 3 blade cleavers......................

[jdfenn81]

Does anyone know where to buy these NEU motors. I have found one in stock and need a second.

Jeff

[Make-a-Wake]

This store has all the 22 series..................2215, 2217, 2220, 2225, 2230

http://www.cermark.com/products/NEU-2230-series%3A725kv-or-1Y-winding.html