I'm running 2p batts and i also have about a pound and half of epoxy in the hull bottom.
MHZ Racemaster build
Collapse
X
-
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
-
Real proud of this as it was completely re-vamped after the failed 5692 8s2p setup.
Ran like a dream..............even in 30 mph winds and decent chop..............which she ate right up!
Took the guts out of my 39" DF copy "Vader" boat and threw it all in here..............driveline too actually
Castle 1717
6s2p
Swordish 200a
3/16 Speedmaster stinger
Octura x450
I'm pumped!
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
I ran it for over four minutes straight and edited down the vid.....................were not supposed to run more than 45 seconds with a new setup but it had run in the other hull so i was confident. Dont know how much mah out of the 10,000 I have left, I'll check the cell voltage in a bit.NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
-
Thanks Rob..................I'm gonna enjoy this one...................I have a brand new S + B x645................hmmmmNEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
Thanks Sri.....................NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
Hey M-a-W, nice build. Makes me want a mono. It looks really stable in that chop. How did you like the FC ESC? I noticed you moved over the SF w/ the 1717. Figured you did not want to re-solder the connectors, yes?Disclaimer: I hereby accept the potential loss of motor, ESC, entire boat, or credit rating, and forfeit all expectations of success.Comment
-
I havent run a DF35, but I have a Pursuit which is just a few inches shorter. You considering a Racemaster?NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
I'm just having a real "time" with the "race water" conditions with this,not to mention my hatch is cracked from the flex of a few hard slaps over it's own wake.I may be ordering a Pursuit from Ben later today but it is not 1717 material.That will be for our "future club" runs to be fair.Comment
Comment