Mystic C5000 1140mm new projet build

[cyprus31]

Thanks Kent. I have emailed you about the cowl locks. Cant be bothered to write it here again.

[Punisher 67]

Very nice build cyprus31 - a few questions please

- Where did you get the hull and how much....was the hull from MHZ
- what is the total length x width.......sorry should have read post #1 - 1140mm

Thank you

[cyprus31]

Thanx very much Punisher 67
yes the hull is from MHZ Germany. Width is 290mm and it cost me EURO 395.- + shipping Euro 50.- to Cyprus.

[Pwb201]

Sent back a message Kent, btw you guys know where I can pick up a set of three blades?

[nata2run]

I got Octura 450/3 LR from steve here on OSE, but dont feel good about using them yet. try to run some 447's 2 blade ballanced & sharpened ofcause. How fast you wanna go: 80+mph? maybe 450 props. Do you know if your motors can handle it?

[Pwb201]

Have those big wheels also, 450 mm 3 blades sounded good until they came in mail and saw how big they really are. Maybe good for saw runs on lower cell count but have to be careful with motors.
Looking to get my hands on 445 3 blades. Have 442, 447, and 645, wanna try 3 blade to lift stern alittle more.

[cyprus31]

Guys any idea where can I buy 45mm 1/4 pitch 3-blade props?

[cyprus31]

Left and right rotation of course

[ManuelW]

You could order over OSE a pair of cut down X450's from Andy Brown.
At the moment I don't know a manufacturer of 45mm 3-blade props with pitch 1.4
From PropShop you can get a pair of GP 4714/3 LH/RH - maybe try those?

But what about a little smaller props with higher pitch like ABC 1616/3 or PropShop 4217/3?

Best regards,
Manuel

[nata2run]

Manuel, What kind of props did Christian have on the Golddigger and 2face? They look chrome? Stainless?

[TINY]

I'd image they would be from NASA or the prop shop...lol

[nata2run]

HA! LOL, why didn't I think of that. Shaould of rang NASA striaght up!, and not wasting "bit's" of space on the the forum LOL

[Pwb201]

I'm in on the 445 3 blades too!!???

[cyprus31]

Thanks Manuel.

Will give it a try

[cyprus31]

Manuel
I have tried to find the 4714/3 LH/RH from prop-shop uk but they dont have them in their website.

Can you please provide the link?