Mystic C5000 1140mm new projet build

[cyprus31]

Mystic C5000 1140mm new projet

Hi Guys
after a long waiting time of over a month, I finally received last friday my new baby .

MHZ Germany though did not sent me the struts and some other parts. No I have to wait another 2 weeks for those parts to be re-stocked and another 10 days until they are shipped to me in Cyprus. Oh God. What a nightmare !!!

I also got the JBS racing decal system. Besites they were a bit of expensive now I realized why. Top quality graphics.

I intend to run it with the following setup:
2 x 4082 2200kv Leopard motors
2 x 200A Swordfish Esc

I also have 42mm, 45mm and 47mm L/R props to do my tests before I decide for the next steps.

I do not want to wait another 3-4 weeks before I start building my Mystic therefore I will fist sent it for paint then I will bring it back to apply the JBS decals and then must go back for a clear coat.

Any sugestions guys for abtaining maximum speeds are welcomed

Thanks
Nicholas

[nata2run]

OH YEAH!!!! This should be good.....you will be on the water before you know it

Will this be on 5 or 6s??

[cyprus31]

Thanks very much nata2run

[nata2run]

The 2200 kv on 5s with x447 will be a hotish setup definitely make sure you run sharpened and balanced props. It should give you 120 ish km/h my leopards are only there to play around if all goes well I will soon upgrade.

Good luck with the build.

[cyprus31]

My 2200kv will be always on 6s and all the props which will be using are balanced and sharpened. Hopefully I dont start flipping this beauty becasue of high speed

[tiqueman]

Congrats Cyprus. Cant wait to see here done. Any chance you could post a pic of the graphics. Ive sent them a few emails over the last 2 months about those JBS decals and have got no response. Im trying to figure out how much is paint and how much is decal as Id like to put them on a race boat, and as we all know, race boats get scuffed, and Id rather it be all decal than fades, etc of paint.
Thanks!

[cyprus31]

Hi tiqueman and thanks for your wishes.
Its strange they havent replied to you becasue whenever I contact them I always get a reply latest the next day. Please see below un uploaded image of the JBS decals on Mystic. Mine is currently at the painters shop for a new paint before I apply the decals. After I will have to take the boat back to the painters shop for the final clear coat.
Its a hell of a job mate but never mind because I like doing it after a long day full of stress.
regards
Nicholas
mystic.jpg

[nata2run]

My 2200kv will be always on 6s and all the props which will be using are balanced and sharpened. Hopefully I dont start flipping this beauty becasue of high speed

Wow 2200kv on 6s with large props careful though. From what I can read they start wanting to take off at around the 130 km/h but that's still fast. Look forward to see some progress soon and especially the JBS scheme it's my favorite.

[cyprus31]

Hi Guys
finally today my Mystic will come home from the painters. (will upload some pics later) Below is a picture of my hardware which I intend to start with.
2 x Swordfish 200A Esc with extra capacitors
2 x Leopard 4082 2200kv with cooling jackets
4 x 3s Nanotech (connected as 2 x 6s packs) 5000mah 45-90C

Also through this forum I would like to thank my friend Kent (nata2run) from Australia for his great assistance in building this beauty.


IMG_0760.jpg

[nata2run]

Hi Nick, very kind of you. All the best mate with the build. Althought there are many clever people here, don't be afraid to ask.

Kent

[cyprus31]

Guys
please let me know your Props recomendations for obtaining high speeds. I currently have Octura X442 L/R (not balanced/sharpened), Alum X445 (balanced and sharpened) and Alum X447 (balanced and sharpened). All props with 1/4 pitch.
Would love to also try 3/blade but dont know which one.

MHZ has 49mm 1/4 pitch 3/blade which I would love to try.

[nata2run]

Uhhhh careful, I would try 445 first I think it's almost the limit for your setup 447 on 5s 450 on 4s not sure about 3 blade maybe 445/3 on 5s you have the y wind motor?

[nata2run]

Pictures Pictures Pictures Pictures

[cyprus31]

Guys
I finally got my Mystic back from painters yesterday. I did not like at all the work on it so I gave it back for respraying the whole lot.

Pictures will be uploaded soon

[nata2run]

Hehe fuzzy like myself. Made sure I let them know, one mistake and they can repaint