My maritimo cat twin build

[Brushless55]

Straight from H&M
http://www.hydromarine.de

Thanks !!

[sigelitest]

My choice on props would be a

Pair of octura x442 , left ,right ,detounged , sharpen and balanced.

Second choice would be octura x646 detounged, sharpened and balanced.

Also you will need left and right flex cable for the job.

You mention square end flex, With the power you have i would go for the round end flex

I use the round end flex 3/16 for my twin and i have had no problems. Very strong...

I like what you did with the foam , How about a bulk head to finish it off.

The centre of gavitiy for this hull - A very good place to start is 37cm from the transom forward.

Also make sure you leave yourself lots of room for the lipo's to be moved forward or back to fine tune
your COG.

Here is a link to a very nice twin Maritimo built by Wolf , Check it out mate lots of good info there.
http://forums.offshoreelectrics.com/...Maritimo-build.
And here is my thread on the twin Simrad Maritimo.
http://forums.offshoreelectrics.com/...-cat&highlight=.


Bonewar

Thanks for the info it helps a lot. It is a very nice hull and just enough room for twins
I have put bulk heads in before and got water behind them. Are you putting drain holes in them?
I have had aeromarine hulls that leaked from the seams. Tried to seal them but they always leaked.
Anyway back on track. I think once I get it setup perfect I will have it painted with auto paint. Can paint never seems to hold up

[sigelitest]

Finedesign carries them
http://www.finedesignrc.com/hullshydromarine.asp

or

Straight from H&M

http://www.hydromarine.de

i got mine from fine design but i am not sure what happened to chris because his store phone is disconnected the hull was about 360.00 usd

[Brushless55]

where do you get these hulls?
thanks

is there someone in the US who we can trust to buy one from?

[thomaslambo]

i got mine from fine design but i am not sure what happened to chris because his store phone is disconnected the hull was about 360.00 usd

I purchased my Maritimo from Chris as well (not many people sell this hull....it's a bit high priced).

Also, I spoke with Chris this morning, no issue with his phone or the store. You might want to check your number.

[drwayne]

Great as a twin, not so fun at speed in corners !
It will need an airdam for 60+ or will fly.
I ran 6S1P to 2x1512/1800 x442 mod for race water.. easy 3mins
see sig
W

[fastasyoucan]

Hi, this is Chris Fine. I'm alive and well, and so is my phone number. You can reach me at 845-342-5102 (Fine Design line); 845-800-0161 (cell); and locally 845-342-8697(TOYS)- hobby store line. Happy New Year to all!

[sigelitest]

well i have started up again and after looking at dougspaint i am sending this one out for paint.
i love this hull and i am excited to see what he can do with it. i will post pics when i get back.

[sigelitest]

Hi, this is Chris Fine. I'm alive and well, and so is my phone number. You can reach me at 845-342-5102 (Fine Design line); 845-800-0161 (cell); and locally 845-342-8697(TOYS)- hobby store line. Happy New Year to all!

yep the number works now i am not sure what was up the number is stored in my phone and it said it was disconnected before.
could be issues with my cell

[sigelitest]

Great as a twin, not so fun at speed in corners !
It will need an airdam for 60+ or will fly.
I ran 6S1P to 2x1512/1800 x442 mod for race water.. easy 3mins
see sig
W

thats awsome, looked like fast fwd vid

[sigelitest]

Well I sent the hull to dougspaint and it was sent to propainter because dougspaint was having some issues. Propainter was able to get to it last week and it looks perfect from the pictures he sent. It went out Fri the 24th very good experience with Propainter these are the beginning pictures. I will take more when it comes and I will post it with hardware.

IMG951043.jpgIMG952782.jpgIMG950067.jpg