yes but the clearance for the tubes is too tight goign to either change the cooler to a silicone cooling jacket or swap out the nipples for 90 degree ones
"Our society strives to avoid any possibility of offending anyone except God.
Billy Graham
yes but the clearance for the tubes is too tight goign to either change the cooler to a silicone cooling jacket or swap out the nipples for 90 degree ones
FYI, the cooling jacket for the PB 1800KV motor has nipples that are closer together-- I had to use that one in my shovel vs. the stock one from the pb1500kv.
Looking forward to the videos,
I have the old black one on my boat that fits pretty good in their,
With a Feigao (sp) 1734 kv, t120 esc.
Running pretty good with a x642 so far, Gps at 44 mph and running cool temps.
OSE stopped selling it and restocked with this one. http://www.offshoreelectrics.com/pro...e-80959-jacket
The boat looks good Jim
I had a custom water jacket with the exhaust coming out the front made for my Budweiser .
Remember the water is only going to fill to the level of the exhaust water fitting .
I like mine to enter at the bottom and fill to the top/front then exit.
T.C. 887.jpg885.jpg
Comment