Tweet
Hey what's up everyone. I'm in the process of building a Twin Leopard 4074 2150Kv powered Cat. I'm building it from 1/8" Ply and Balsa. I'll post a few pics of my progress. Seeing that this is my 1st scratch build, I do have a few questions. 1st, I would like to run 4s, but in terms of ESC, can I use the Hobby Wing 120A, or would it be safer to just use the 180A? I would like to use the 3/16" prop shaft and flex cable.. Where can I find these for Counter rotating props? If you need any other Info let me know.. Thanks for you help.
-
-
Go with 180. I'm pretty sure ose has the cable. You could go with .150 cable also. That thing is gonna be fasst -
Here are a few more pics of my progress... Things are going a bit slow, but I think it's coming out OK.Comment
-
OSE or Fightercatracing.com have the cables. you might have to contact steve to get counter rotating ones.
OSE also has a large array of props, both normal and reverse rotation.Comment
-
that thing is gonna be a beastComment
-
Comment
-
Made my motor mount today, and test fit the motors. Tacon 4074 2150Kv.Comment
-
are those 4mm bullets? they look a little small to carry the amps of a huge boat.Comment
-
OSE does carry left and right flex cables. .150 is the size I went with as well.
http://www.offshoreelectrics.com/pro...oct-oc150L-24c
http://www.offshoreelectrics.com/pro...oct-oc150R-24c
Comment
-
yeah, I'm upgrading to 8mm, i'll just run that on everything from now, it's easier to have one standard connector and run everything on that, then there are no adapters or problems with anything not fitting together.Comment
-
5.5mm bullets are plenty for this setup.
Why 2 rudders? Just personal preference?Comment
Comment