Tweet
what drive strut is that man its sexy does it have bearings? and I see you have a 1520 castle same here what are you using for a esc?
Justin
Justin
-
USAF F-16 Crew Chief E-4
T-rex 500 class helicopter
1/4 scale Gee bee R1 racer -
Have you took her out for a ride yet fastisgood........???NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
What esc are you running fastisgood?
On a side note, to all you guys out there who bought these 1520 castles during their clearance sale:
These motors are NO GOOD and you dont want to even mess with them...send them to me and I will properly dispose of them for you
Comment
-
Thanks that drive is a speedmaster 2140 esc I don't have one I need one I like the castle hydra ice 240Comment
-
I'm persitent so i'll ask again if you have run it yet????
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
no I need to get a escComment
-
I almost got that strut tonight, but ive put enough money in this boat. I wont put more into it till I can get it to act right doing 60mph. with no
waiting to see how this goes, interesting
Land, Sea & Air, A true RC Addict.Comment
-
any picsComment
-
Most everything is posted in the Spartan RTR threads of this forum. Here are a few pics. Started this back in January.
Running a Leopard 4082 1500Kv, T-180 ESC, M645 prop, Speedmaster dual pickup rudder.
my best speed to date here
boat runs pretty stable in chop. But in smooth water its chinewalking, I feel is due to the torque of the new motor and prop. I can watch the videos i make in slow motion and see the boat lean over to starboard the start the chine. So now I am going to try and relocate the stinger a little up and to the right. in hopes to keep more of the vee in the water and offset to help counter torque.
Land, Sea & Air, A true RC Addict.Comment
Comment