help delta force 35 hardware install

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Taylor
    Senior Member
    • Dec 2010
    • 106

    #16
    yea man they fit in their like butter i mean perfect fit lol i couldnt get any better they fit so good you dont even need a strap but i will just for safety sounds good i wont have to buy higher mah packs shew..

    Comment

    • rearwheelin
      Fast Electric Addict!
      • Oct 2008
      • 1941

      #17
      Originally posted by Taylor
      yea man they fit in their like butter i mean perfect fit lol i couldnt get any better they fit so good you dont even need a strap but i will just for safety sounds good i wont have to buy higher mah packs shew..
      You only need higher mah packs when your C ratting is lower. your discharge rate is what is most important in combination with mah. A good rule of thumb is have batteries that never go over 70% of there limit, they will last longer and not send voltage spikes to your esc. A single 5000mah 40-50C can give you 200 continuos amps but your setup should not draw more than 140 amps....that is if you are concerned with stressing your battery and the capaciters on your esc.. I learned this stuff the hard way................
      "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
      --Albert Einstein

      Comment

      • Taylor
        Senior Member
        • Dec 2010
        • 106

        #18
        yea man they fit in their like butter i mean perfect fit lol i couldnt get any better they fit so good you dont even need a strap but i will just for safety sounds good i wont have to buy higher mah packs shew..

        Comment

        • Taylor
          Senior Member
          • Dec 2010
          • 106

          #19
          dont know why that posted twice

          Comment

          • gerardobrandao
            Senior Member
            • Mar 2008
            • 164

            #20
            Hello

            Checkout mine DF 35 in the Offshoreelectrics forum and you can have an idea..running low sixties...with NEU1527 1.5D

            Best Regards

            http://forums.offshoreelectrics.com/...highlight=DF35

            Comment

            Working...