Blackjack 26

[forescott]

You're gonna like the castle outrunner! I like not having to use a cooling can for the motor, but keeping the battery wires away from the motor is kind of a pain. I'm going through a lot of zip-ties!

[Diesel6401]

You're gonna like the castle outrunner! I like not having to use a cooling can for the motor, but keeping the battery wires away from the motor is kind of a pain. I'm going through a lot of zip-ties!

Sweet, I ran mine along and zip-tied to the rail. 1 tie worked for me for the motor/esc wires.

[dano1]

Salutes the blackjack, nice ride

[Diesel6401]

Salutes the blackjack, nice ride

This is round 2 for me, had 1 sold it and wanted another 1. Got lucky on craigslist.

[forescott]

I got a brand new hull and hatch for 60-bucks. Couldn't pass it up!

[calcagno45]

Whats the bolt circle for mounting the Castle 34-24-1800 outrunner? 25mm?

[forescott]

2-holes @ 25mm, 2-holes @ 30mm

[JackBlack26]

Working on converting my Nitro to electric right now. I already layed a layer of glass along the whole bottom and I'm working on getting the hull prepped for paint. I was going to use a spare Feigao 1830kv, XL motor in it. I'm intrigued by these out runner motors now. Do they not need a cooling jacket? Castle still has the 32-24-1800kv motors at clearance prices. If they don't need a cooling jacket I will pick one up for sure!

[forescott]

Working on converting my Nitro to electric right now. I already layed a layer of glass along the whole bottom and I'm working on getting the hull prepped for paint. I was going to use a spare Feigao 1830kv, XL motor in it. I'm intrigued by these out runner motors now. Do they not need a cooling jacket? Castle still has the 32-24-1800kv motors at clearance prices. If they don't need a cooling jacket I will pick one up for sure!

Get one! No cooling jacket required. They are great motors. I am thinking about getting another for a spare.

[JackBlack26]

Thanks. I think I will order one.

So you're running the Castle out runner motor with a Pro Boat 45A ESC? It's holding up well?

[forescott]

Thanks. I think I will order one.

So you're running the Castle out runner motor with a Pro Boat 45A ESC? It's holding up well?

So far so good!

[calcagno45]

Thanks, going to order 2.

[JackBlack26]

Just placed the order for 1 to go in my BJ26 nitro conversion. I cant believe it was only $49!! I'm going to run it in with my water cooled Mamba Max ESC on 4S.

Should be here by the end of the week

[forescott]

You can actually run it safely on 5s if you like. I'm getting 43-44 mph on 4s with an octura x-642.

[JackBlack26]

I'm going to try the Grim 42x55 with that motor. I really like that prop in my MG. Should make the BJ26 fly!