Here we go.............
First step ; sanding the interior.
Didn't like the seam in hull.
I sanded/removed all the tape that didn't stick to the hull in the correct way.
Epoxied a 4inch wide kevlar tape/cloth over the joint/seam.
As I hate the sanding I decided to try the use of peelply.
First step ; sanding the interior.
Didn't like the seam in hull.
I sanded/removed all the tape that didn't stick to the hull in the correct way.
Epoxied a 4inch wide kevlar tape/cloth over the joint/seam.
As I hate the sanding I decided to try the use of peelply.
Comment