Newbie new build delta force 26"

[Chuck E Cheese]

ya why are there no pictures of the aledged water pump, and wait my join date was 5-31-08 isnt that more than a year ago??? and rumdog 3-09 thats more than a year, rearwheelin 10-08, baked 9-09, mark 3-08 hmmmmmmmmmm all less than a year. i guess he is right. at any rate until i see some data charts and a video (or even picture of finished product) i am a sticking with what the top pros and engineers are using.

I WILL MAKE A STATEMENT TO BRUSHLESSRACEV AND STAND BY IT.
IF YOU CAN PROVE A DF26" BOAT WITH A FEIGAO 11L THAT IS 9MPH FASTER WITH ONLY A WATER PUMP INSTALLED I WILL GIVE YOU THE COMPLETE COST OF THIS BUILD, IF YOU ACCEPT THIS AND CAN NOT PROVE IT YOU MAIL ME THE BOAT SO I CAN MAKE A VIDEO OF IT GOING 60 MPH COMING OUT OF A WOOD CHIPPER..

[Rumdog]

^^^Yessss!^^^

[Brushlessracev]

You have proved nobody wrong. 5 different guys came right out and said you were full of it. I've never seen that on this forum, ever. Your data is B.S. It makes no sense. Again, pics of the completed boat would be nice. Not a painted bare hull.
I'm not pissed, just calling you on obvious lies. Guys have ran Neu 1515 1y's in that hull, and have not been as successful as you with a Feigao 11L. Again, explain what has been asked. First run, cold motor/esc punch it. Now you add pond water to the same cool motor and it magically 12mph faster?

do you really want me to brake your hart, the neu and the feigao motors are no different there made by the same company. just like most of the speed controls are made by the same company in China. Runing a neu v a feigao is no different then running a hobbywing sea king and a turnagy. I have seen videos on you-tube same hull running upper 60 mph i do not know why you cant believe it. go to you tube. i ran the boat for 2 min before collecting the data so it was already warm. turned the water pump on and temps drooped instantly.

[BakedMopar]

WOW! A Neu is the same as a Feigao. No wonder you gained 12 mph with a water pump.

[Chuck E Cheese]

no that is some funny stuff take the 2 motors apart, 2 pole vs 4 pole, better bearings, hand wound. better call steve at neutronics and have him send you pictures of his shop in california. last i checked that was not in china.... you have to be kidding right?

[Rumdog]

AHHHAAHA! ANNNND, the best statement of the thread yet! You know nothing. That is half a pic by the way. It also looks like the motor mount isnt even epoxied in place. Neu and Feigao, THE SAME. Good GOD.

[Chuck E Cheese]

ad better yet he is gitting such low amperage and good results from cheap batteries and deans classic.....

[Rumdog]

When will he give up on the B.S. and just bow out?

[Chuck E Cheese]

i want him to take the challange, i would love to see this boat coming out a wood chipper at 60

[Brushlessracev]

I have owned this hull BTW. I know what it is capable of, and what it takes to get it running well at over 40 mph. Lots of other guys here have had it also. It's funny how the new guy with his first boat comes here and blows everyone out of the water and proves us all wrong. lol

But the problem is you do not realize i have been racing rc cars for 30 plus years professionally. i know my way around Plains helicopters cars trucks hovercrafts and now boats i have owned them all. this is a 60 mph delta force 26 http://www.youtube.com/watch?v=0bwJYEM0t1s

[Rumdog]

OK. Ask JesseJ if he thinks your setup is realistic with your claims. (JesseJ is the handle on this forum for the guy who made that vid) You're avoiding the topic BTW.

[Brushlessracev]

i want him to take the challange, i would love to see this boat coming out a wood chipper at 60

How about i take your face and put it in a wood chipper!!!!!!!

[Chuck E Cheese]

rad the comments dumb @ss it is a 40mph delta 26"
"So had to go for it, temps were sub 100F on 4S with the GR 4255 so went for 6S. GPS had said 34 mph before, and due to rough water and first run, didn't get straight shot long enough to register good speed, but would bet close to 40."

[Chuck E Cheese]

that is a comment from the same guy that posted the vid..

[Chuck E Cheese]

obviously you have no idea what 60 looks liek on the water