HPR 233 electric build

[Tommy Gun]

I'm not sure wether or not I will prop it up to run 90mph+ which is very possible, I'd like to keep mine in the 70-80mph range:D maybe go up on a prop just for a vid...? But I'd like to try to keep a decent run time and be reliable.. And on top of that I'm not anywhere near the skill or knowledge level of most any of the guys running the "Big" cats so I won't know all the little tune tricks among other things needed to know to break triple digits..
But to answer your question: if someone more experienced than me had this boat and same setup, diff props, and or batteries they could break 90mph+

There agn I'm not tryn to set speed records! Although 70+ is fast to me :)
posting more pics soon!

[Tommy Gun]

Not to mention, a very skilled driver!!

[old guy]

If this is the cat I think it is I got his 54" hydro. He does nice work, you will have fun with that. I was thinking of it to but I'm still thinking about a jet for my hydro and it was the same price. If you are going to go over 80 I would add some carbon to the seams . my HPR 115 at 89 when flipped cracked on the side

[Karfrik]

Niceeeeee!!!!!!!!

[Tommy Gun]

not a whole bunch of anything but i did get a few small things done...
,

[Tommy Gun]

i made the Plexiglas just 1.5" longer to the back that way i can mount my receiver further back so ill have plenty of antenna exiting the hull, i decided to use the servo tray and mount the plexi on top of it for my BEC, receiver lipo cut off, and receiver... the receiver 2 cell will be mounted behind the servo tray on the hull
(i don't have nearly enough stuff to use/fill the big radio box that was supplied with the hull so im trying to keep everything to a minimum)

[Tommy Gun]

now waiting on servo wire and ends, all my 8awg and 10awg wire and all my 8mm and 4 mm bullets so i can start wiring this beast up... should be deciding on a paint scheme this week ill post the sketches he gives me..
but for now my main focus is the esc brackets

[Tommy Gun]

**thinking about selling the boat guys... i havent made up my mind yet but im thinking within the next week it will be back up for sale... it sucks but i just cant finish it and dont have any time, and my boat funds ran out fairly quick...

[Tommy Gun]

and by the way everything i have got for the boat will go with it:
lots of turnigy 8awg wire
lots of turnigy 10awg wire
65+ 8mm connectors male and female
all the servo wires and all futaba ends/connectors
(2) schulze 40.160's (moded from schulze with 4 added caps)
all the orange cooling lines 1/8" and 1/4"
castle BEC PRO
(2) 2s 5800 mah turnigy lipo (was going to be used for the reciever/servo power)
and hull mounted anttena... and more

[JMSCARD]

So tommy gun are you selling it or keeping it? I suggest parting it out if you sell it.... way to big of a expense for most to "take in" in one lump sum... lol... but true...

[Tommy Gun]

Yes it will be posted soon but yea it is back up forsale forsure.... I'm wanting to sell it as a whole but I would maybe consider parting it out later if it doesn't sell or have any decent offers... Itl be on
this forum
rumrunnerracing forums
rcuniverse forums
eBay..
And any other sites would be greatly apreceated