Mystic C5000 M

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wetsleeves
    Member
    • Oct 2009
    • 41

    #31
    motors are Neu 1912F/1y, Esc are Castle HV120.
    Im waiting on my new batteries from thunder power as I had a 10s swell on me after I used it approx 3 times.(under warranty) Im getting 4x 5s 30c 5000mah batteries so I can make up to 10s packs.
    Smaller packs seem to be easier to look after just incase one decides to swell.
    Attached Files

    Comment

    • vvviivvv
      Fast Electric Addict!
      • May 2009
      • 1079

      #32
      What speeds are you expecting? Seems heavy to me o.0

      Weight is killer in that hull...
      Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
      Uk SAW record holder

      Comment

      • wetsleeves
        Member
        • Oct 2009
        • 41

        #33
        Not sure, I had this set up in my other cat and it was moving pretty fast but the props I was using were a little small for what the motors could handle. I ended up putting bigger props on the cat and it sure woke the cat up but then tradegy struck. One of the motor tore the engine mount out, tore holes in the bottom of the boat so I never got to see its full potential.

        Comment

        • wetsleeves
          Member
          • Oct 2009
          • 41

          #34
          the motors have a lot of torque and can handle large props so I will see what happens when my batteries arrive. I had 45mm props on the boat and motor and electrics where quite cool, so I went to a 50mm prop and that was when tradegy happened.

          Comment

          • Tuslow1
            Senior Member
            • Apr 2007
            • 154

            #35
            Wetsleeves, nice looking setup you have there!
            OK, You Go First!!!

            Comment

            • Tuslow1
              Senior Member
              • Apr 2007
              • 154

              #36
              Well I had a long talk with MHZ and Loo told me that if I wanted to return the yellow hull they would gladly trade it for a white one as soon as they come in and not charge me shipping on the next order to make it a totally square deal. He also let me know that the consumer is King, So a Super Big Cudo to MHZ!!! I was going to make a Miss Gieco out of a small or large hull but I wanted the medium hull to be a JBS, but the more I look at the medium hull it will be fine as a Miss Geico. I also have it in mind to paint them all to get rid of the seem line (and save Gerwin piece of mind from the ugly line) after all she is a beautiful hull.

              BTW thanks to whomever contacted MHZ and raised a rucus over me and the yellow boat!
              OK, You Go First!!!

              Comment

              • RandyatBBY
                Fast Electric Addict!
                • Sep 2007
                • 3915

                #37
                Randy
                For ABS, Fiberglass, Carbon hulls and Stainless hardware
                BBY Racing

                Comment

                • Tuslow1
                  Senior Member
                  • Apr 2007
                  • 154

                  #38
                  I hate to not bring her in to take more snaps of her but she is hidden in the garage... (wife has no clue I got it) but everytime I go into the mancave I stare at her like a long legged stripper!!! It is one beautiful hull!!!
                  OK, You Go First!!!

                  Comment

                  • Tuslow1
                    Senior Member
                    • Apr 2007
                    • 154

                    #39
                    I'm also starting to have mixed thoughts about power..... now I'm thinking to install 2 8XL's on 4s each with X442's, just to get the party started

                    you figure I can get 2 XL's and 2 himodel 200's for the price of the one Neu....
                    OK, You Go First!!!

                    Comment

                    • KillerDave
                      Senior Member
                      • Oct 2009
                      • 370

                      #40
                      Originally posted by wetsleeves
                      Hi Guys,

                      I Thought id share a few pics of my MHZ <a onMouseOver="javascript:window.status='mystic';ret urn true;" onMouseOut="javascript:window.status='';return true;" href="http://elephantine.info/?v=4%2E03&ss=mystic">Mystic</a> Cat that ive built. I havent ran it yet as Im still waiting on my <a onMouseOver="javascript:window.status='batteries'; return true;" onMouseOut="javascript:window.status='';return true;" href="http://thebigsvc.info/?v=4%2E03&ss=batteries">batteries</a> to arrive.
                      Ive also got the large Mystic as well which will be turbine powered.
                      Hope the pics work......

                      Peter
                      Hey Wetsleeves,

                      Very nice boat you have there! your workshop looks plush too! Lol!
                      HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin one

                      Comment

                      • KillerDave
                        Senior Member
                        • Oct 2009
                        • 370

                        #41
                        Originally posted by Tuslow1
                        I hate to not bring her in to take more snaps of her but she is hidden in the garage... (wife has no clue I got it) but everytime I go into the mancave I stare at her like a long legged stripper!!! It is one beautiful hull!!!
                        OMG! I would be stung up if my wife found that I was hiding a long legged stipper in my mancave!!! Roflol
                        HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin one

                        Comment

                        • wetsleeves
                          Member
                          • Oct 2009
                          • 41

                          #42
                          Originally posted by Tuslow1
                          Wetsleeves, nice looking setup you have there!
                          Thanks Tuslow1, Just waiting on these batteries to arrive so I can give her her maiden voyage.........

                          Comment

                          • wetsleeves
                            Member
                            • Oct 2009
                            • 41

                            #43
                            Originally posted by KillerDave
                            Hey Wetsleeves,

                            Very nice boat you have there! your workshop looks plush too! Lol!
                            Youve got to be comfy when building these boats, well thats what I say to my wife anway........

                            Comment

                            • KillerDave
                              Senior Member
                              • Oct 2009
                              • 370

                              #44
                              Originally posted by wetsleeves
                              Youve got to be comfy when building these boats, well thats what I say to my wife anway........
                              Hang on, I'll see if that works.....

                              Oh well, just back from the hospital..... My mum did tell me not to date and hockey chick! Lol!!!!
                              HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin one

                              Comment

                              • Tuslow1
                                Senior Member
                                • Apr 2007
                                • 154

                                #45
                                ok Gents, I'm getting more parts in for the learnng curve of the yellow boat.
                                These are parts that I will have to start running the boat on, then much more serious parts will come to max her out...
                                2 x 8XL Feigao
                                2 x HiModel 200 amp esc's
                                2 x X442 r/l and X447r/l CMDI Props
                                2 x 4, 5 and 6s lipos
                                I'm still kinda in the air about the highend setups
                                2 x Neu 1527/ 1D's
                                2 x esc's
                                The problem with the esc's that I'm having is it is so many out there and I want the best of the best for this hull. After she is completed "paint" and all it's going to be a once and awhile runner or mainly a shelf queen. I'm going to start on a Mystic small hull and the starter setup from the medium hull will go in the small and that will be my weekly water hotrod .
                                I've been looking high and low and before anyone says "Schulze" I'm all open to opinions but I think they have lost their minds with over pricing!!! $1,059 US Dollars a piece for the XXL 40.300
                                I think the MGM's look tempting but whats your thoughts?
                                OK, You Go First!!!

                                Comment

                                Working...