Used to run a H&M NS3 (29") with a 9XL, ETTI 150A, 4S2P, on a S/B X442 and the motor/esc came quite warm. I would only attempt a X442 if I were you, a long shot would be an X642 but you will be pushing the ESC hard...
Delta force 29 with Peter Zicha mount
Collapse
X
-
Ok, Thanks Guys on the heads up on the ESC.
Changed it out for a Seaking 180, had to mount it at the back because of its sizeSTUFF NITRO GO LIPOFASTELECTRICS.COM
OFF-SHORE-ELECTRICS.COM
INVENTOR OF LITHIUM CELLS:bowdowComment
-
Here is some video of the maiden run with the NEW NEU 1415-1Y and a X437/3 blade
running 4S2P
quite a nice little boat
STUFF NITRO GO LIPOFASTELECTRICS.COM
OFF-SHORE-ELECTRICS.COM
INVENTOR OF LITHIUM CELLS:bowdowComment
-
Congrats, very nice runYou mentioned in the video you had a data logger, what kind of amps and temps where you getting?
KenComment
-
Ashleys setup is : Turnigy 5000 30C 4S2P
Seaking 180A V2
Octura X437/3 blade
New spektrum DS3s with the MR3000 marine RX
Neu 1415-1Y 2200kv (very effiecent and cool running)
The battery temps were 55C
the motor temp 47C
the ESC Temp low 40C
these temps where on a 28C day.STUFF NITRO GO LIPOFASTELECTRICS.COM
OFF-SHORE-ELECTRICS.COM
INVENTOR OF LITHIUM CELLS:bowdowComment
Comment