Results 1 to 12 of 12

Thread: Hifei issue 4,11

  1. #1
    Join Date
    Jul 2012
    Location
    SP
    Posts
    975

    Default Hifei issue 4,11

    Today we did some saw tests using a TPpower motor 4050 connected to a 300 lite esc.Everything worked great ( no running issues) but when we decided to open the Hifei 4.11 software there is no way to know the recorded data.
    Esc connects to computer,we can open the device and go to the data recorded window,choose the correct number poles of motor(4) and click to download data that goes good (transfer runs ok) till we try to open the new window so we have a running error message and windows(10) close the whole program.
    I really don't know the real problem so let me know what do you think.
    Thanks
    Gill
    GO FAST AND TURN RIGHT !
    www.grsboats.com.br

  2. #2
    Join Date
    May 2017
    Location
    OK
    Posts
    1,460

    Default

    Try right-clicking on the program icon for the heifi software. There is a compatibility command in there. Try setting it to run on Windows 7 system. You may need to use XP SP2 as well. I had the same issue until I got the right operating system running on it. Choosing this then executes the program under selected system as if you had that operating system actually loaded. I hope that helps!

  3. #3
    Join Date
    Sep 2013
    Location
    IN
    Posts
    851

    Default

    My newer model 300, runs 6.xx software but had the same issue. Right click on the program and run as administrator, that solved it for me.

  4. #4
    Join Date
    Jul 2012
    Location
    SP
    Posts
    975

    Default

    Thanks I will get a try and let you know...on my old laptop with Vista I had no issues.
    Gill
    GO FAST AND TURN RIGHT !
    www.grsboats.com.br

  5. #5
    Join Date
    Jul 2012
    Location
    SP
    Posts
    975

    Default

    NICE its working......Thanks a lot!....a sample of those tests.
    Cheers
    Gill
    Attached Images Attached Images
    Last edited by grsboats; 05-19-2018 at 10:16 AM.
    GO FAST AND TURN RIGHT !
    www.grsboats.com.br

  6. #6
    Join Date
    Aug 2017
    Location
    OZ
    Posts
    577

    Default

    I had a recent issue with a newly purchased Swordfish Pro+ 200 amp ESC. Would not open on version 4 so as I had already downloaded version 5.02, I tried that and the programme ran normally.

  7. #7
    Join Date
    Jul 2012
    Location
    SP
    Posts
    975

    Default

    Thanks oldschool....I did what trigger wrote....ran it as administrator and worked.
    Cheers to all
    GO FAST AND TURN RIGHT !
    www.grsboats.com.br

  8. #8
    Join Date
    Sep 2013
    Location
    IN
    Posts
    851

    Default

    Sweet, glad you got it.

  9. #9
    Join Date
    Jun 2018
    Location
    WI
    Posts
    19

    Default

    I use an old XP laptop my Windows 7 don't work well at all RUN XP.....

  10. #10
    Join Date
    Dec 2011
    Location
    oh
    Posts
    30

    Default

    tried all of the above still a no go + a time out error ordered a new program cable see if that helps

  11. #11
    Join Date
    May 2007
    Location
    NY
    Posts
    1,556

    Default

    Quote Originally Posted by nitrous8e View Post
    tried all of the above still a no go + a time out error ordered a new program cable see if that helps
    Had the same happen to me, ordered a new USB cable and that fixed it.
    Team Liquid Dash

  12. #12
    Join Date
    May 2017
    Location
    OK
    Posts
    1,460

    Default

    First, you have to be sure you are using the right comm port. Need to go to “Hardware Devices” on your computer. Plug the cable in when attached to your ESC. You should see the Device List refresh, note what pops up in the USB section. It will say what port that is. Use that port number in the Heifi program. If you plug it into a different USB port on your computer, the port number will change, so use the same port.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •