Turnigy HeliDrive SK3 Competition Series

[sampit]

Four new motors in at hobbyking also a nice low profile servo, not sure if this is any good for boats, but it looks nice and compact

http://hobbyking.com/hobbycity/store...ize_heli_.html

http://hobbyking.com/hobbycity/store...ize_heli_.html


http://hobbyking.com/hobbycity/store...ize_heli_.html

http://hobbyking.com/hobbycity/store...ize_heli_.html

[Fluid]

Only one motor is appropriate for most FE use. The little 28mm motor lacks torque, and who uses motors with Kvs under 600? I will have to admit that they are cheap....



.

[sampit]

At a guess would that be the 1600kv one?

[FastVee]

Any update here? -no1 tried these motors?

This looks really nice for 6s

The size is almost identical to t600 but these are finned.

[lenny]

Hey that looks like a bad ass motor to try,
I have one of these and still have not run it in anything yet.
http://www.atomik-rc.com/V700-Marine...er-1100Kv.html

Any update here? -no1 tried these motors?

This looks really nice for 6s

The size is almost identical to t600 but these are finned.

[ray schrauwen]

I agree... I noticed that motor the other night and I might check one out. It would be nice to see if it could power a Whip 40 on only 8000Mah 40C pack for 6-7 laps at close to competition speed. I know it's apples and bananas but, it's the same KV and close power rating to a Neu 1527 1Y- 1250kv ....

Any update here? -no1 tried these motors?

This looks really nice for 6s

The size is almost identical to t600 but these are finned.

[lenny]

Any updates about these motors FastVee or Ray or anybody ?

[ray schrauwen]

No, never bothered. Maybe in the spring.

[lenny]

Toying with the idea of the 800kv one for a atomic 58" cat on 8s to 10s,
If that motor is built like the t600 I think it may turn out to be a good sport boat runner.
Not sure if fastVee tried any of them yet.

[FastVee]

Not even tested these yet, the boating season is gone and cant say much until next summer, sorry.

They do feel solid and magnets are stronger then t600 but that is all I an say for now.

Pate

[ray schrauwen]

If you want to try a T600 880kv unit I have a pair and will send you one for postage. It is sorta new but, has been mounted and lightly spun. I'll keep the other one to tinker with it's in a 29" cat, lol...

PM me your addy and I can send it out. Do a little paypal later if you want.

Toying with the idea of the 800kv one for a atomic 58" cat on 8s to 10s,
If that motor is built like the t600 I think it may turn out to be a good sport boat runner.
Not sure if fastVee tried any of them yet.

[lenny]

Thanks for the heads up Ray and Pate.
It getting colder hear but I still can go run boats and test a little most of the time,
The ponds are forming a little bit of ice on the very edges at night but thaws out by noon if not before.