F/S outrigger craftsman work )

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MagnetO
    Junior Member
    • Jan 2013
    • 9

    #1

    F/S outrigger craftsman work )

    size is 90 cm , sponson booms together cutted from FC sheet , booms are allum , will be build for an order , takes 20 days for build all , no drilled , no hardware , no motors or no electronics , I will add turfin and bracket plus gift )


    $250 plus shipping

    only Paypal accepted


    081220126715.jpg081220126716.jpg081220126717.jpg081220126719.jpg081220126720.jpg

    About hardwares , also I can add them , and I have HV swordfish ESC 8S 300A , new in bag and brand new , never used ,
    but I will let you guys choose their own motors ,
    I can include , brass tubing , flex shafts , rudder , strut , drivedog also , just ask me with this details ,

    thanks

    MEL
    Last edited by Doug Smock; 01-10-2013, 09:00 AM. Reason: Merged posts
  • MagnetO
    Junior Member
    • Jan 2013
    • 9

    #2
    all saw outrigger will be build with high quality epoxy and wood , all is handmade,

    and plus

    95mm rudder
    3/16 strut
    flexyshaft
    brass tubing
    brass tube teflon
    drivedog
    servo mount
    motor mount with carbon bottom ( 40 size)
    sponson boom tubes
    sponson carbon legs
    turnfin also will be handmade

    everything ready to drive only without
    Motor , ESC , servo , shaft collect for motor and prop. ,
    and hatch will be designed FG (fiberglass) it will be less weight also

    total will be $430 plus shipping , you will add your own motor and servo and transmitter , receiver
    and you will fly on water

    Comment

    • Namba328
      Factory Team Pilot SPP
      • Jul 2011
      • 1117

      #3
      Is the length the total length with hardware or is it total length without hardware???
      Tommy Levescy sponsored by: RCJuice.com, Rawspeed, Scorpion Precision Performance, TC Racing, Triton RC, Oxidean Marine and Cencal Hobbies.
      Current Namba 1mile record holder: Pltd sport hydro 1:19:72 P-sport hydro 1:14:31

      Comment

      • siberianhusky
        Fast Electric Addict!
        • Dec 2009
        • 2187

        #4
        Neat ,clean build. Can you post a picture with batteries in the hull? Where does the CG work out?
        I like the looks of that rigger! Very interesting!
        If my boats upside down then who owns the one I thought I was driving the last two laps?

        Comment

        • MagnetO
          Junior Member
          • Jan 2013
          • 9

          #5
          Originally posted by siberianhusky
          Neat ,clean build. Can you post a picture with batteries in the hull? Where does the CG work out?
          I like the looks of that rigger! Very interesting!
          Hello mark , sorry for late answer , working day start really busy here , thanks for you kind words , try to do my best, there is nothing added on hull I mean main frame all wood , 1/8 and 1/16 plywood , sometimes I use laser cut , but this photo has handmade, there is not much actually difference , only lasercut takes less time , but handmade more fun and detailed also , all parts goes from my hands ) so I did this one little bit wider because of using HV batteries , and batteries can place easily front of motor , on the nose , there is enough place four 2 x 4s lipo and I fitted my own lipos easily to there , as you know outrigger has CG as possible as front of hull , but honestly this change with your setup ,it will change what motor and what lipos and esc placed in it , that's why I don't build RTR , everybody has their own setup , and everybody try to use what they likes ,

          Comment

          • MagnetO
            Junior Member
            • Jan 2013
            • 9

            #6
            thanks for you guys , I am buildin' 8th now , let me share photos ,

            021220126619_resize.jpg021220126620_resize.jpg021220126622_resize.jpg021220126623_resize.jpg021220126624_resize.jpg

            Comment

            • MagnetO
              Junior Member
              • Jan 2013
              • 9

              #7
              041120126406_resize.jpg081220126719_resize.jpg161120126486_resize.jpg161120126487_resize.jpg161120126488_resize.jpg

              Comment

              • MagnetO
                Junior Member
                • Jan 2013
                • 9

                #8
                191120126501_resize.jpg191120126502_resize.jpg191120126503_resize.jpg191120126504_resize.jpg191120126505_resize.jpg

                Comment

                • MagnetO
                  Junior Member
                  • Jan 2013
                  • 9

                  #9
                  191120126506_resize.jpgDSC_6895_resize_resize.JPGDSC_6896_resize_resize.JPGDSC_6933_resize_resize.JPGDSC_6940_resize_resize.JPG

                  Comment

                  Working...