AussieHydros 33" sport Hydro

[Hydro111]

Hi, we are now selling our 33" Sports hydro after we have been so successful with it.
Hull length = 33.5 inches
Hull Width = 16.5 inches

wait time will vary on how many orders i have at the time but may take up a maximum of 4 weeks to send.
this hull meets all of Namba rules.
We have ran Neu 1515 1Y and also the Neu 1521 1.5D on 4s1p as our rules only allow 4s1p, both setups can be a fast competitive boat with the appropriate prop.
Since we have not ran 4s2p we recommend the Neu 1521 1.5D because of the additional weight that the 4s2p brings.

Black Epoxy Glass hulls $250 AUD

Black Epoxy Glass/Carbon $350 AUD (full carbon floor, carbon turnfin area, carbon transom and carbon sides)

Postage cost to the U.S.
Express Post International (this is the only insured post)
Postal charge $63.50
U.S. security surcharge $9.00
Extra Cover $17.10 ($350 value)
Total Charge $89.60
This is all in $AUD
Please use Paypal for Exchange rates as this changes daily.

We have accomplished quite a lot here in Australia, against the Whiplash and PT SS21 hulls
1st 2010 Thunder Down Under EA sports Hydro (P open Sports Hydro 4s1p)
2nd 2010 Thunder Down Under EA Sport Hydro (p open Sports Hydro 4s1p)
3rd 2010 Thunder Down Under EA Sport Hydro (P open Sports Hydro 4s1p)
1st 2010 Club Spec Sports Hydro (feigao XL motors, 4s1p)
3rd 2010 Club Spec Sports Hydro (feigao XL motors, 4s1p)
2nd 2010 Australian Nationals EA Sports Hydro (P open Sports Hydro 4s1p)
1st 2011 Club Spec Sports Hydro (feigao XL motors, 4s1p)
2nd 2011 Club Spec Sports Hydro (feigao XL motors, 4s1p)
3rd 2011 EA sports Hydro (P open Sport Hydro 4s1p)
1st 2012 Australian Nationals EA Sports Hydro (P open Sport Hydro 4s1p)

The pics show how the hulls will be sent. they do not have a gelcoat finish as these are epoxy hulls. they do have pinholes require filling/finishing but less then some other epoxy hull have. also a pic of finished product.
P1010141.jpgP1010136.jpgP1010138.jpgP1010139.jpgP1010140.jpg

Also here is Example of my Special built full carbon hull build thread.
http://forums.offshoreelectrics.com/...dro&highlight=

[Hydro111]

[TINY]

Do you make a blokes version... My wife wants one in pink....... ETA?

[Hydro111]

We also do a Sport 40
it measures 37" x 18.5"
Epoxy glass hull $400 AUD
Epoxy glass/carbon hull $500 AUD

Here are some pics showing it against the smaller 33" hydro
antos hydros 2011(2).jpgantos hydros 2011(1).jpgP1010061.jpgP1010054.jpgP1010059.jpg

[ray schrauwen]

Is it me or does it look like the ML boatworks hydro done in FG??

[mtbenjamin77]

It looks alot like the PT SSP21 with a slightly different cowling, not saying its a splash just looks very similar. that's prolly a good thing phil knows what he's doing.

[Hydro111]

Is it me or does it look like the ML boatworks hydro done in FG??

actually we made this boat in 2008 which looks similar to ML Boatworks Hydro, see pics below
P1010022.jpgP1010025.jpg

[Brushless55]

do you offer these prebuilt?
thanks

[Hydro111]

PM Sent

[cybercrxt]

Brushless, tho its obvious both myself and Hydro111 used the U-21 Eliminator Unlimited hydro as a basis for our hull shape and "look", the bottom side is completely different on the two hulls... Mike

[Hydro111]

Yes that is correct

[Brushless55]

Yes that is correct

Soon I will see for myself

[Hydro111]

Todd the boat that cybercrxt and i are talking about is the older boat that was built in 2008, which is not the same as the 33" sport hydro

[Brushless55]

Todd the boat that cybercrxt and i are talking about is the older boat that was built in 2008, which is not the same as the 33" sport hydro

So the one I bought is much different?
thanks

[Hydro111]

yes its alot different. the 33 Sport hydro is a modern design.
the 2008 hydro is based of a early 80's design i think, also it was only 30" inches long


Pic of Older 2008 hull
P1010022.jpg




Pic of newer 33" Sport Hydros (pink/white one is the one you got Todd when it was new)
P1010141.jpg