Outboard Flex Shafts

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Kris Flynn
    #2 Bench Racer
    • Mar 2009
    • 229

    #1

    Outboard Flex Shafts

    Hi All,

    Some of you may not know but I have been making flex shafts for many Nitro and FE guys for a few years now. Only problems so far is 2 orders going missing, but not bad out of about 100 I am sure someone who has some will chime in if they see this LOL

    Anyway I have some shafts in stock right now to suit anything from the OS lower units to K&B to Thunder Tiger. I also have some 7.5 shafts available.

    OS and K&B/Proboat/Hyperformance - $8.50ea or $31 for 4 off
    Thunder Tiger - $7.50ea or $25 for 4 off
    Custom - $8.50ea or $31 for 4 off
    7.5 shafts (Lawless/Hyperformance) - $12.00ea or $45 for 4 off

    I have also made some custom shafts for people who run the Hyperformance adaptor on the OS lower unit. What they found was the stock OS shaft would spin in the coupler easy and the shafts from Hyperformance would be too tight in the OS prop shaft. I make them a little bigger on 1 end than the other so you get a snug fit in each item.

    All prices are in USD and include paypal and postage.

    Paypal is krisflynn85 (at) gmail.com
    In the text, list what you need.

    Cheers
    Kris
Working...