motor mount

[cacofonix]

hi all

if some of you are interested, i'm milling aluminium motor mount.
i mill first one for a friend, and now i have several different model.

- 5692 (4")= 70$
- 5692 5" = 70$
- 5692 + esc plate = 75$
- CC2028 (5") = 70$
- CC2028 (4") = 65$
- CC1717 floor mount = 60$
- CC1717 (4") = 55$
- CC1520 floor mount =58$
- leopard 40xx = 39$
- leopard 2435 = 20$
- NEU 1521 4" + esc plate = 49$
- NEU 1521 = 45$
- NEU 1527 / 1524 = 47$
- NEU 2230 5" = 70$

and small one for 26mm outrunner (19 mm between screws) with integrated water cooling (18$)


international shipping cost for up to 300gr parcel
with tracking : 35$
without tracking : 15$
without tracking economical : 10$

so don't hesitate to contact me

herve

[wparsons]

How much would it be for the water cooled outrunner mount?

[cacofonix]

hi wparsons

for what type or brand of motor ??

[6sHyper]

how much for the 5692 and the 1717 mount?

[wparsons]

A 450 size outrunner (28mm), I think they have 19 and 25mm spacing but it might be 16mm and 19mm.

Like this one:

http://www.hobbyking.com/hobbyking/s...dProduct=11177

[cacofonix]

hi

with current version, max ø motor is 26 mm
and 19 mm between screw holes.

but it can not take long to make a larger one !!

herve

[rcbidder]

Requesting motor mount for Neu 1527 going in a H&M 36" Mono(no Rails).
What is your leadtime and price? Thanks, Joe

[cacofonix]

hi rcbidder

thanks for asking
this motor mount will be a little longer than 1521 one
so price is same 50$

for leadtime ..... i can ship it w19 (i'm visiting in-laws next week ......)

herve

[cacofonix]

hi there

for those who are interested
here is NEU 1527 mount first 3D view

i have to check there is no problem with water fitting
when adjusting angle
max angle is 23°

i'm also working on CC2028 mount too big

herve

[HYDROJERRY]

Hey i have a theme going in my boat,,,do you think you can do a servo mount for the Hitech low plrofile servo and how much shipped to 27549 US.

[cacofonix]

hello hydrojerry

have you already think to a particular design ?
otherwise i have something for you

i will post pictures soon

herve

[HYDROJERRY]

Sorry for the late reply, so show me some pics and well talk,, my boat is all CF and my motor mounts are shinny aluminum so iwas thinking a aluminum servo mount would look cool,,so let me no. PS its a low profile servo so it will be standing up no turned on its side like others ive seen..

[cacofonix]

hi jerry

here are pics

herve

[HYDROJERRY]

did you say the first pic left to right was for a lowprofile servo??

[cacofonix]

no no

i don't have specific mount for low profile
first pic is standard servo mount
2nd and 3 rd, it's also a standard servo mount i design for maritmo hull.

but it will fit with a low profile mounted on top (not reversed as shown on pics)


herve