TFL Hobbies "Popeye" Hydro: P-Sport Hydro

[flraptor07]

yes that's one of em I use the black anodized one myself just personal pick (I just like to spend more money lol)

Kintec makes a heavy duty mounting bracket for it too. The way Kintec's site is I can't put a link up. Also how big of a boat do you think this fin would be good for? I have a 44" Hydro I'm doing and wondering if this fin would work on it too.

[Doby]

On a 44" hydro I'd be looking for something a lot stronger.

[LiPo Power]

Turn fin:

http://www.offshoreelectrics.com/pro...od=dh-aqub9539

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXVXS6&P=7

[ray schrauwen]

For a few dollars more Mike Hughes will make you a killer turn fin made with 7075.

[LiPo Power]

I have one for sale here:

http://forums.offshoreelectrics.com/...-by-BBY-Racing

Heave duty with bracket and side support and mounting kit.

[tlandauer]

For those of you who have already replaced the stock turn fin with the UL-1 turn fin, I am curious to know to what extend do you have to re-drill the holes to fit the bracket? Can at least one hole be used? I ask because I want to position the bracket at the right spot, may be I am getting ahead of myself since I don't have the boat yet.
Thanks

[Doby]

For those of you who have already replaced the stock turn fin with the UL-1 turn fin, I am curious to know to what extend do you have to re-drill the holes to fit the bracket? Can at least one hole be used? I ask because I want to position the bracket at the right spot, may be I am getting ahead of myself since I don't have the boat yet.
Thanks

The outer existing hole is used and a new upper hole needs to be drilled.

[tlandauer]

Thanks Doby!!!

[ron1950]

I used a generous amount of clear silacon in the inner hole...was in a hurry ...prob would use a small wood dowel and epoxy if had the time...

[JimClark]

Anyone figure out if these are namba legal?


Sent from my SGH-T989 using Tapatalk

[flraptor07]

Anyone figure out if these are namba legal?


Sent from my SGH-T989 using Tapatalk

From what I've been told and my interpretation of the rule book...... YES

[Doby]

I'd like to see the measurements for all hydros running in both organizations to see how they are interpreted.

[flraptor07]

I'd like to see the measurements for all hydros running in both organizations to see how they are interpreted.

Doby, You've got one in hand, do you think it's legal? I just had Monica give me measurements, I haven't got mine yet.

[Monica Smith]

1131-2.jpg

[Jeff]

It apears to measure over 35 inches long. So it would be a Q boat, not a P or P-limited.