Etti Race just came in....

[Steven Vaccaro]

Yours doesnt have a BEC. There is a lower voltage model that does have a bec, thats the one I have. I have more of the higher voltage NON-Bec coming in a week.

[Bill-SOCAL]

So the first batch was correct and it was the second batch that was the lower voltage. Got it!!

[Steven Vaccaro]

So the first batch was correct and it was the second batch that was the lower voltage. Got it!!

Yes.

What happened was when reordering I was told about the bec version. I jumped on it without looking at the max voltage. So I ended up with a bec version of less voltage. Which isnt a problem, since lots of people want a bec and only use 4s. But I will continue to stock both escs.

[Bill-SOCAL]

Did they ever provide any specs on the Cap board? I snagged a couple for testing, etc. Adding 10 big caps has to make a difference, but it would still be good to know what the actual numbers are from them.

[westbeach]

I just found out that when I asked for the race 150 WITH bec, that the max voltage is only 5s/16 nimh cells. It was my mistake to overlook that spec.
I will have the race 150 6s/20nimh with NO bec in about 2 weeks.

Hi Steve,

Placed my order for the ETTI, can I get the ETTI w/o BEC for 6S setup Please! Thanks.
Neal

[Steven Vaccaro]

Bill I'm working on those specs. All I have now is the 35 volts. I "assume" its for 7s lipo max, but you know what happens when you assume.

Neal we spoke by email. I will have you an esc in a week or so.

[Bill-SOCAL]

35 volts should get you up to 8S. The big caps on my ESC are all 35V.

The top is stamped

81L
470
35V

[westbeach]

No rush on shipping the ESC Steve. I will be out of town in a weeks time till the end of the month. Just chimed in because of what I just read about the High/Low Bec/Non-Bec versions of the ETTI.

[BILL OXIDEAN]

100 6-16

I just wanted to add that the 100a 6-16 is a reliable and suprisingly strong running speedo as well..

I changed the rotor in my 4.5 Novak, and the boat's running strong, I'll have vid in a few days..

I think the cooling plate works REALLY well.. The flat design allows superior cooling to the fets

[Steven Vaccaro]

The Race 150 6-20 NiMh / 2s-7s lipo esc's are in stock now. Also more capacitor boards came in.

[Bill-SOCAL]

I got the capacitor board yesterday. They are every bit as nicely done as the ESC. Sealed with a conformal coating just like the ESC.

[BILL OXIDEAN]

WoW!

My ETTI sponsons just landed, and can I say WOW!?

Straight lace SAWS sponsons, zero dihedral FIERCE hydro/arerodynamics the carbon work is better than anything I've seen on ANY market including imports!

I'm speechless about 'em.. They're so nice, I don't wanna' drill 'em out LoL..

Check 'em out on the ETTI site..

[Scott T]

I just wanted to add that the 100a 6-16 is a reliable and suprisingly strong running speedo as well..

Bill,

You seem to have a bit of experience with the Etti controllers. Any chance you could could help me in my thread?

http://forums.offshoreelectrics.com/...highlight=etti

Thanks,
Scott

[Meniscus]

My ETTI sponsons just landed, and can I say WOW!?

Straight lace SAWS sponsons, zero dihedral FIERCE hydro/arerodynamics the carbon work is better than anything I've seen on ANY market including imports!

I'm speechless about 'em.. They're so nice, I don't wanna' drill 'em out LoL..

Check 'em out on the ETTI site..

Let me know when you do drill them, I'm headed there next with mine.

[BILL OXIDEAN]

Let me know when you do drill them, I'm headed there next with mine.

Will do.. I spoke with Dee from ETTI and he showed me pics of his..
They're drilled all the way through with telescoping carbon booms and aluminum collars..
I'll try to post pics..

Is it just me, or do they look like an engeneering marvel? How did they mold 'em seamless like that but airtight and hollow? FEATHER light