Twin Neu motors for 36" Cat

[Pooley]

I want motors that were used in a twin setup before and have about the same amount of use, probably around 2000Kv to about 2500Kv

[oliver]

I have 2 1521 1y castle creations 2650 kv and 2 160 amp water cooled esc 2 to 5 cell and 2 5mm to 3/16th couplers with a set of condensor backs 225.00 shipped

[Pooley]

Done!!

[kfxguy]

I have 2 1521 1y castle creations 2650 kv and 2 160 amp water cooled esc 2 to 5 cell and 2 5mm to 3/16th couplers with a set of condensor backs 225.00 shipped

You made a typo. Castle doesn't make a 1521 2650kv but they do make a 1512 2650kv. Just to clarify for you

[oliver]

Sorry I corrected it, thanks

[oliver]

they are 1512 1y not 1521 1y sorry

[dasboata]

36 Sprint cat ? tight for electrics especially twins

[Pooley]

Hey Dasboata it's a 35" Delta Force what props do you recommend

[Pooley]

Still looking for a set of Neu motors for but its a 40" Cat so I think the KV can be a bit lower like 1500kv to 2300kv of course I'm open to suggestions

[Pooley]

still looking

[Fluid]

Dude, no one knows what you want, no wonder you haven't gotten much for replys. Is the cat a DF 36: http://www.offshoreelectrics.com/pro...cat=Boat+Hulls ? Or is it a different hull? DF doesn't list a 40" cat.

What do you want to do with the boat, run ovals, back-and-forth running or real SAW racing? What run time and speeds do you want? What voltage do you want to run? If you want duals then either 4S or 6S would work. Motor Kv will depend on the answers to the questions above. Answers will make it easier to help.


.

[Pooley]

It's a copy of a zonda or something something at 38.5" black carbon fiber a buddy on OSE sent me a like to an eBay add that looks spot on however it's an inch longer, to be clear I did start out looking for a set for the 35" DF I got a set for it so I then kept the WTB going as I needed another set of motors for another cat