Esc 120a or bigger

[Wavewalker]

I am looking for a nothing special a ESC 120A Water cooled. Turnigy Auquacraft, Ant kind that will work till my one on backorder comes in. Gentlemen please dig deep and help me get going. I also am looking for some 5.0 to 5.5 connector bullets. Not looking for anything free.



Please contact me with good news

Thank You
Chris Grisham

[dude123]

I have a turnigy aquastar 120 but i wont be home until monday night so it wouldnt ship out until tuesday?

[Wavewalker]

I have a turnigy aquastar 120 but i wont be home until monday night so it wouldnt ship out until tuesday?

I can wait till then since Burger King takes 8 weeks can you give me price for that and you figure out shipping or I will send you a shipping label with it.
Thanks Chris grisham
1309 N.W. Antoch ave
Stuart, Florida 34995

772-621-6191

[dude123]

Ya i will txt u

[Wavewalker]

my phone does not take twxt

[fidelity101]

If you're in a hurry, I purchased this from ebay and it looks like a Turnigy 120A ESC...only much faster shipping than HK. :)

http://www.ebay.com/itm/311011369961

[dude123]

Ow ok well are you familiar woth bec's this one needs one

[fidelity101]

I usually use a 2S 1100mah or 1600mah LiFe pack for receiver/servo power. A BEC is another good option but I haven't tried water proofing one yet. :)

[dude123]

Ok well this esc has a blown bec but still works fine nothing s wrong with it. I have been running it with a bec and it works fine i havent tried it without a bec though. If you are still interested let me know

[RCBoaterGuy]

Dude
The Venom ESC is a Seaking 120A (v2) \ Turnigy 120A clone, specs are here... http://www.hobbywing.com/product_show.asp?id=220 those specs also apply to the Turnigy & the Venom clones.

2S~6S, built in BEC, programmable by Tx or HobbyWing program box & the various clones of them.

If you would rather avoid eBay, you can buy it direct from Venom... http://www.atomikrc.com/collections/...-120a-boat-esc - notice free ship

It's exactly the same as the Seaking's \ Turnigy's - I downloaded Venom boat manuals till I found the one that use's this ESC, all settings are precisely the same.

HK sells the Turnigy 120's for $49.99 + ship = just shy of $60 total (I paid $49.99 + $7.99 ship), so the Venom copy is competitively priced.

Hope that helps you out - good luck

Ow ok well are you familiar woth bec's this one needs one

[dude123]

Ya i mean i thought id just put it out their, http://www.hobbyking.com/hobbyking/s...mming_Card.htm this is the one i have.

[RCBoaterGuy]

That's a re-badged SkyRC Swordfish... http://www.skyrc.com/index.php?route...product_id=111

Here's the card... http://www.skyrc.com/index.php?route...product_id=112

Was looking at getting one of those, but after reading the reviews on HK decided to stay with the Seakings \ Turnigy's & clones - gonna call Venom support tomorrow find out what gauge wire they used on that one I posted a link to.

Ya i mean i thought id just put it out their, http://www.hobbyking.com/hobbyking/s...mming_Card.htm this is the one i have.

[fidelity101]

The AtomikRC 120A ESC has 12 gauge wire on both sides. EC5 connector on the battery leads. I just looked at mine. :)

I'm going to use it in my new Tunnel hull if I can ever find an OS Lower Unit.

[RCBoaterGuy]

fidelity - THANK YOU!! for the update

Just checked my Turnigy 120A - 12ga on both sides - recently converted my boats to EC5's, like them better than Traxxas cuz the wire makes 360° with the bullet.

Are the Atomik EC5's split top??

I know the motor bullets are 4mm, no prob, easy to remove & replace with CC 5.5's - have a set on hand.

FYI: Check the swap shop, could'a swore I saw a couple OS lowers there.

The AtomikRC 120A ESC has 12 gauge wire on both sides. EC5 connector on the battery leads. I just looked at mine. :)

I'm going to use it in my new Tunnel hull if I can ever find an OS Lower Unit.

[fidelity101]

I don't believe they are. They're just standard ec5 which I think are the same width front to back. Here are a few pictures. Sorry they're not very helpful..Id have to remove the cover to show a better picture