wttb outboard tunnel

[jerry123]

I'm looking for a electric tunnel like Steletto F-1 tunnel. Looking to race in the .21 nitro tunnel class.


thanks Jerry

[flraptor07]

I have a Hydro and Marine F-1 Skater I'll let go for $150.00 + shipping. steering W/servo and radio box are in it. It needs the cowl bulkheads and cam lock glued back in but other than that it's in real nice condition. I'll get you pics if interested. Actually it's on the bottom shelf in my avatar pic.

[flraptor07]

Here's a link to the old F/S thread on it. http://forums.offshoreelectrics.com/...amp%3BM+skater

[Quietlee]

I've got a modified AQ VS-1. Sponsons were cleaned up and another ride plate was added. All of the AQ "epoxy" was sanded off and was replaced with West Systems. The transom was moved forward to make room for the machined aluminum jack plate that allows for precise angle and height changes. REK lower with a spare, couple of spare cables, and even a spare cowl will be included. Bottom line would be $200 + shipping. Motor, cooler, and AQ ESC could be added for $50. DSC01503.JPGDSC01501.JPGDSC01502.JPG

[jerry123]

(hydro & marine) Hi, thanks for the offer but I am looking for something more complete.

jerry

[jerry123]

(aq vs-1 )Hi, how many amps is esc? What motor? Aprox how fast and how does it corner? My plan is to run with the .20 nitro tunnels. What lipos are you running? Also what is hull length and width?


jerry

[BHChieftain]

I have this raceboat for sale:

http://forums.offshoreelectrics.com/...l-Geico-Scheme

If interested you can contact me at [email protected]

Chief

[Quietlee]

AQ tunnel is a little over 29" - ride pads extend a little beyond the back. About 11.5 wide with the tunnel being 6.25". 60 amp ESC with the AQ 2030kv motor. Typically running Blue Lipo 30C 5000mah on a 437/3 or 440/3. The extra ride pads gave it a little more speed and it keeps up with the others. Like any tunnel, you need to slow a little in the corners. Didn't race it much last year but driving won it over speed when it was raced. (Helps to not flip, spin out, or spear a bouy.)
Radio area is original AQ. Battery and ESC area is custom and has plenty of room.
DSC01506.JPGDSC01504.JPG

[flraptor07]

AQ tunnel is a little over 29" - ride pads extend a little beyond the back. About 11.5 wide with the tunnel being 6.25". 60 amp ESC with the AQ 2030kv motor. Typically running Blue Lipo 30C 5000mah on a 437/3 or 440/3. The extra ride pads gave it a little more speed and it keeps up with the others. Like any tunnel, you need to slow a little in the corners. Didn't race it much last year but driving won it over speed when it was raced. (Helps to not flip, spin out, or spear a bouy.)
Radio area is original AQ. Battery and ESC area is custom and has plenty of room.
[ATTACH=CONFIG]112908[/ATTACH][ATTACH=CONFIG]112909[/ATTACH]

Who makes that motor mount and where can I get one?

[RayR]

Who makes that motor mount and where can I get one?

HiJack mount made by Capt Vic (victor goreki) in Calif. Unfortunately, he stopped making them about two years ago.

[flraptor07]

HiJack mount made by Capt Vic (victor goreki) in Calif. Unfortunately, he stopped making them about two years ago.

That figures!