WTB Cat hull

[fbass4u]

lookinhg for a nice cat larger than 40" to build into a twin, boat can be set up for twins already or one that needs finishing doesnt matter to me, let me know what you have. I have cash in hand ready to go.thanks

[Fluid]

I have a Stryker F-41 cat I ran with a single drive, here are some photos. The rails are on 3.5" spacing, leaving more room to access the sponsons. It is obviously not a scale hull, but it is comfortable above 65 mph. Length = 41". Hull and hatch only, no hardware = $100 + shipping.

037 Large.jpgJay_s_Artic_Cat[1].jpegInterior.jpg

[meangenesracing]

WOW, fluid thats a great deal

[Fluid]

The hull has been raced with some chips etc but it is totally sound. I need to get it out of the shipyard to make room!




,

[tlandauer]

Hi Fluid,
May I ask you how many cells on the set up and what size motor and props for a hull this size?

[Fluid]

I ran it on 10S1P/6500 mAh with a Lehner 3060 motor. Props ranged from x457/3 to x465/2 depending on the use.


.

[tlandauer]

I ran it on 10S1P/6500 mAh with a Lehner 3060 motor. Props ranged from x457/3 to x465/2 depending on the use.


.

Thank you very much for the reply. I am not familiar with Lehner motor size, compare to Neu, what would be similar? ( size wise for practical comparison) Sorry for the stupid question!

[a_altermann]

I have an HPR 135 with all the hardware, twin Lehner 3060 motors and every part needed to build the boat. Everything is brand-new. Interested?

[Powerboat 5000]

@altermann how much are you asking?

[keithbradley]

Have you seen the 55" hydrolift I have in the swap shop? It's thecurrent IMPBA SAW record holder and has only been run one day.
It's currently equipped with motors and ESCs, but I would sell it without if you're interested. Top quality hardware and quality build.

[a_altermann]

HPR 135 for Sale

@altermann how much are you asking?

HPR 135 bullet proof, custom cf set up, 2 Lehner 3040 motors( 11 wind), 2 Castle Hydra Ice 200 with Capacitor banks, all HPR HARDWARE(drives, rudder, Hydraulics),savvoxx Servo, 2 Andy Brown props, MHZ water pick ups, futaba Fast receiver, and more. Everything is new. No holes in boat. $3,200.00 for everything

[fbass4u]

thanks for offer guys, I bought a Central Rc Mystic to build.

[Savage Skidoo]

I have a Stryker F-41 cat I ran with a single drive, here are some photos. The rails are on 3.5" spacing, leaving more room to access the sponsons. It is obviously not a scale hull, but it is comfortable above 65 mph. Length = 41". Hull and hatch only, no hardware = $100 + shipping.

[ATTACH=CONFIG]106465[/ATTACH][ATTACH=CONFIG]106466[/ATTACH][ATTACH=CONFIG]106467[/ATTACH]

Will you ship to Canada Fliud L1T 2J7 is my postal code .