Anyone got any spares? 1/8" props

[Namba328]

Found another one. This is a 30mm prop I believe........


image

Pm sent

[lenny]

Ok that help,

Then these hammers that Billy found should be close to what you had, Right ?

You will just need a spacer for the shaft for them to work on yours.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMNN0&P=7

And the one 1/4 x 30mm that Dangerous Toys has.

Other than pitch which we do not know,

[lenny]

Hey Billy,
How much you want for it ?
You can pm me info.

[Dangerous_Toys]

PM Replied

[Billy Barnacle]

Hey Billy,
How much you want for it ?
You can pm me info.

Lenny, PM sent

BB

[Billy Barnacle]

Hammer Props

Ok that help,

Then these hammers that Billy found should be close to what you had, Right ?

You will just need a spacer for the shaft for them to work on yours.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMNN0&P=7

And the one 1/4 x 30mm that Dangerous Toys has.

Other than pitch which we do not know,

Lenny.
The hammer props are for 1/8" shafts that's why I suggested them.

My 2nd boat was the TH Power Vee - rebadged AQ Hammer EP - that's how I knew about them.

BB

[Namba328]

Hey Namba, I just got this Mini Mono today... http://www.ebay.com/itm/170982949895...84.m1497.l2649

I threw a bid on it for some stupid a$$ reason and ended up winning. Hull is too far gone for repair, and truth be told the only thing I want is the Tactic Tx for my new Trax Raptor, everything else is for sale.

The speedo is the water cooled version, I attached a couple pix I got from the review on RCgroups, soon as I get my digi cam back I'm gonna take pix of it and the motor and post them in the swap shop.

The prop on the transom is damaged, but the spare is still NIP (see attached pic), PM your addy if you want it.

Regards,

pm sent about the props.

[Namba328]

Tom,
Only have one, like I said before, the prop on the transom is damaged (looks like somebody took a bite out of it), but the spare they tape to the bottom of the stand is still NIP - see attached.

Seller told the truth about the condition of the boat in hiis ad, and like I said before, I was mainly after the Tactic radio system for my new Trax Raptor, so all's good.

Tower only charges $5 /pair - so like what... I'm supposed to charge you for it?? Don't think so

Local PO closed weekends, I'll get it in the mail next week. I'm in So. OR, so should only take a couple days to get to you. It'll be in a small yellow padded envelope.

Regards,
Bruce

thanks bruce. Atleast having one prop will get it back on the water and once dangerous gets a shipping quote for me ill have 2 :)

But if anyone else comes up with any sugestions or props that will be cool.

[Namba328]

Tom,
Only have one, like I said before, the prop on the transom is damaged (looks like somebody took a bite out of it), but the spare they tape to the bottom of the stand is still NIP - see attached.

Seller told the truth about the condition of the boat in hiis ad, and like I said before, I was mainly after the Tactic radio system for my new Trax Raptor, so all's good.

Tower only charges $5 /pair - so like what... I'm supposed to charge you for it?? Don't think so

Local PO closed weekends, I'll get it in the mail next week. I'm in So. OR, so should only take a couple days to get to you. It'll be in a small yellow padded envelope.

Regards,
Bruce

Can you post photos of the mini mono and how damaged it is and the prop on the back of it.

[Billy Barnacle]

Octura Props

thanks bruce. Atleast having one prop will get it back on the water and once dangerous gets a shipping quote for me ill have 2 :)

But if anyone else comes up with any sugestions or props that will be cool.

Hey Tom,
I just thought of something, Octura has several inexpensive small plastic props, all are for 1/8" shafts so there plug'n'play...

Here's links to detailed info, I've bought stuff from these guys before, they're straight shooters, but you can always check your LHS.

x431... http://www.funrcboats.com/ProductInf...uctid=OCX431PL - this would be a nice one to try out with your setup.

x432 (this one is metal, will need prep & balancing) ... http://www.funrcboats.com/ProductInf...oductid=OCX432

y534... http://www.funrcboats.com/ProductInf...uctid=OCY534PL --- The 5 part means it's 1.5 pitch, but I have no clue what the "Y" part means, maybe lenny or one of the other talented gents on this board can shed some light on that.

BB

[Dangerous_Toys]

And the one 1/4 x 30mm that Dangerous Toys has.

Other than pitch which we do not know,

1.4 x 30mm = 1.661" So the total pitch on that prop should be 1.661".

[Dangerous_Toys]

The 5 part means it's 1.5 pitch, but I have no clue what the "Y" part means, maybe lenny or one of the other talented gents on this board can shed some light on that.

BB

The y is just like the x-series with 10% extra pitch through the blade

[Billy Barnacle]

Prop Info

The y is just like the x-series with 10% extra pitch through the blade

Hey Dangerous - THANK YOU for the update

I've been dying to know that for a long time but was afraid of getting ridiculed so I never asked.

Back to the prop... would the xtra 10% pitch make a y534 something like a x634 or similar ??

What would be the benefit(s) of running a "y" prop over an "x" prop ??

Thanks in advance for your help.

Bruce

[Dangerous_Toys]

Here is a prop chart so you can do some comparisons.............http://www.offshoreelectrics.com/propeller-chart.php

[Billy Barnacle]

Prop Chart

Here is a prop chart so you can do some comparisons.............http://www.offshoreelectrics.com/propeller-chart.php

Thanks

And here's one for you to check out... http://www.funrcboats.com/prop_chart1.htm#Chart --

Bruce