looking for a Supervee 27 or miss geico

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 4.6mustang01
    Junior Member
    • Jun 2011
    • 25

    #1

    looking for a Supervee 27 or miss geico

    let me know what you have..thanks
  • 4.6mustang01
    Junior Member
    • Jun 2011
    • 25

    #2
    ttt

    Comment

    • TheShaughnessy
      Fast Electric Addict!
      • Mar 2011
      • 1431

      #3
      I have a super vee hull and hardware. just repainted it white, needs all electronics. Stock running gear, except the rudder doesn't have an inline pick up, the water pick ups are installed in the hull. I'll take some pics if you are interested.

      Comment

      • shotimes95
        Senior Member
        • Jul 2010
        • 101

        #4
        I have a custom painted red candy pearl MG for sale. It has the offset rudder, 5.5 mm bulluts on the motor and esc and a S/B x642. I also have an extra ESC, stock props and Proboat grease gun. PM me for more info... Its just too far of a drive to use the boat.

        Comment

        • gek1946
          Member
          • Jan 2011
          • 95

          #5
          miss geico

          Originally posted by shotimes95
          I have a custom painted red candy pearl MG for sale. It has the offset rudder, 5.5 mm bulluts on the motor and esc and a S/B x642. I also have an extra ESC, stock props and Proboat grease gun. PM me for more info... Its just too far of a drive to use the boat.
          i have a miss geico used about 12 times,perfect shape,changed the rudder to offset,new program card,changed 5/5 bullet connectors,5 lipo batterys 5000mah,new prop strut also the box make offer

          Comment

          • 4.6mustang01
            Junior Member
            • Jun 2011
            • 25

            #6
            Originally posted by shotimes95
            I have a custom painted red candy pearl MG for sale. It has the offset rudder, 5.5 mm bulluts on the motor and esc and a S/B x642. I also have an extra ESC, stock props and Proboat grease gun. PM me for more info... Its just too far of a drive to use the boat.
            pm sent

            Comment

            • TheShaughnessy
              Fast Electric Addict!
              • Mar 2011
              • 1431

              #7
              IMAG0301.jpgIMAG0302.jpgIMAG0303.jpgIMAG0304.jpgIMAG0305.jpg

              The hull did split/crack at the seam but i put a strip of fiberglass over it so it shouldn't be an issue anymore. The paint job is ok, i got a little sick of sanding and filling so there is still a couple minor blemishes. This was my first boat, she has some miles on her. You would have to install the rails and motor mount, or i could do that if you absolutely don't want to. I didn't get around to spraying the hatch white, but i can do that for you if you still have interest. Let me know if you have any other questions of if you need any other angles.

              Comment

              • TheShaughnessy
                Fast Electric Addict!
                • Mar 2011
                • 1431

                #8
                IMAG0306.jpgIMAG0307.jpgIMAG0308.jpgIMAG0309.jpgIMAG0311.jpg

                Comment

                • johnmaclean
                  Senior Member
                  • Aug 2010
                  • 243

                  #9
                  There is one supervee listed on this site and a couple on the Rcuniverse website.
                  A dream not pursued is not worth holding.
                  Aquacraft SV27 x 4, Proboat Mini-V, Redtail Kneeler Hydro, JAE21, ML GP335

                  Comment

                  • tunnelvision
                    Senior Member
                    • May 2010
                    • 685

                    #10
                    I got a red SV hull that is new with lightly used hardware. Has a small spider crack on the bottom otherwise its new condition. Has a 3126 2200kv outrunner in it and the bottom of the boat in the hatch area has been reinforced with a layer of fiberglass. Servo is included and have a 27mhz rx and tx too. Needs flex shaft, prop, esc. If you are interested just send me a pm. Good luck in your search!

                    Rob
                    Attached Files
                    Go Fast...Turn Right...

                    Comment

                    • 4.6mustang01
                      Junior Member
                      • Jun 2011
                      • 25

                      #11
                      bump

                      Comment

                      • Basstronics
                        Fast Electric Addict!
                        • Jun 2008
                        • 2345

                        #12
                        http://forums.offshoreelectrics.com/...-Ms-Geico-Twin
                        42" Osprey, 32" Pursuit, 26" Bling Rocket (rescue), Blizzard Rigger, JAE 21FE rigger, Hobby King rigger (RIP)

                        Comment

                        Working...