Tweet
I'm looking for a fairly inexpensive esc something around $90 or below. Looking for a swordfish open to offers even a etti doesn't have to be new just has to work without any problems
-
Last edited by bbosncali; 06-18-2011, 09:16 AM.miss gieco cc 1518 62.1mph [/COLOR][/B] Delta Force 33" cc 1717 -
i have a t180 but its size has become an issue for me in my new mono and thinking of getting a swordfish esc but lack the funds want to work something out -
How much did you ant for it?miss gieco cc 1518 62.1mph [/COLOR][/B] Delta Force 33" cc 1717Comment
-
Also how much run time is on it and is it version 2?miss gieco cc 1518 62.1mph [/COLOR][/B] Delta Force 33" cc 1717Comment
-
i think its the v2- i bought it used then i only put 2 runs on it since i had it and it worked fine- i put a new base on it and took shrink wrap off the caps was going to put 3 more caps but never did- $77 send as gift shipped- do you want a pic send me your e-mailComment
-
It ill say ver 2 on the top... here is my email [email protected] thanks brandonmiss gieco cc 1518 62.1mph [/COLOR][/B] Delta Force 33" cc 1717Comment
-
i have looked for a v2 turnigy label but have only seen seaking with the version 2 label in pics does turnigy label them v2 or just seaking i know they are the same esc, just curiosComment
-
That's a good question but considering they are the same just relabled they should still be tagged. What did you mean you replaced the base? What happend to the other one?miss gieco cc 1518 62.1mph [/COLOR][/B] Delta Force 33" cc 1717Comment
-
when i got it i think where the screw went in to the base was broke maybe he had some good adhesive and it seperated when removing esc- propper chopper had an extra he sent me now its all goodComment
-
Just waiting on picture?miss gieco cc 1518 62.1mph [/COLOR][/B] Delta Force 33" cc 1717Comment
-
i would like to keep the 5.5 bullets do you mindComment
-
That's not a problem. I found out how to check ifit is version 2. Look at the wires going into the board. Do the wres go through the board or into a bullet? I'm talking about the motor and battery wires? You should be able to see right around the shrink wrapmiss gieco cc 1518 62.1mph [/COLOR][/B] Delta Force 33" cc 1717Comment
-
soldered into a bullet style connectorComment
-
Ok so uppon further testing it looks like I'm going to need a swordfish 200a cause the 180's wires are in my way.miss gieco cc 1518 62.1mph [/COLOR][/B] Delta Force 33" cc 1717Comment
-
well then you in i are in the same boat..... damn you T180!Comment
Comment