wtb kos or segad copy

[bbosncali]

I'm looking to buy a used king of shaves or copy either rtr artr or hull and hardware

[keithbradley]

What kind of EKOS are you looking for? Something cheap, ...nice,.... stock,... upgraded? I've considered selling mine.

[bbosncali]

Preferably stock but I'm open to whatever. Doesn't matter if its stock or modified or a hull eventually it will be replaced. I have an mg now and have had 4 different motors in it already with a 1518 sitting on my bench and a 4082 on the way. Cheaper the better but like I said I'm still open to whatever is available obviosly I don't want to pay $450 for a stock boat if I don't have to

[bbosncali]

Should have also added I want electric not gas

[keithbradley]

Preferably stock but I'm open to whatever. Doesn't matter if its stock or modified or a hull eventually it will be replaced. I have an mg now and have had 4 different motors in it already with a 1518 sitting on my bench and a 4082 on the way. Cheaper the better but like I said I'm still open to whatever is available obviosly I don't want to pay $450 for a stock boat if I don't have to

I would want a little more than that for mine. Mine was never "stock", it was purchased as a hull only and built. It's not quite finished yet, I need to mount the servo and instal the carbon fiber stuffing tube supports. If you're interested in something a little better than stock, let me know (should be 70mph+). If you just want a deal on a stock hull/hardware you would probably be better off with something else.

[bbosncali]

What kind of motors and escs are in in it? Als what price are you looking for. Don't need an rx

[keithbradley]

Motors are Suppo 1500watt 2200kv outrunners
ESCs are Castle ICE 100's

I would sell it with the (2) Brand new 5s lipos pictured, S&B CR x442 props, and Castle ESCs for $675. Servo would be added and boat would be ready for your radio.
I could substitute watercooled Suppo 200A ESCs for the ICEs and bring the price down a bit if you wanted.

[bbosncali]

That's a nice set up. 200a suppos would be more than enough but the castles are nice. Out of curiousity how much with the suppos? 675 is a little more than I wanted to spend but it is a nice setup

[keithbradley]

I think they are like $46 + shipping from HK when they are in stock, but they are backordered and dont usually last long when they are in stock. I got mine from Fightercat but they dont carry them anymore.
EDIT: I just re-read your post and realized you aren't asking how much they cost, just what I want for the boat with them instead of teh ICE escs...oh well.
I could knock off $100 if you wanted the suppos instead of the castles. I personally would run the ICE escs in this boat just because there is so much carbon fiber it would be a shame if an esc burned. The ICE escs have a overcurrent feature you can set to shut the esc off if current goes over a certain amount. Im not saying its impossible for the castles to make smoke and fire, but in my opinion its a lot more unlikely. Plus the data logging is great. Only disadvantage to the ICE escs is they are air escs so you have to run pistix or use a tx that will work with air controllers.

[Brushless55]

What about this one?
little better quality than the venom copy hulls

http://fightercatracing.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=18&category_id=13&option=com_virtuemart&Itemid=1

[bbosncali]

Those are nice and after looking at them I really wanted a carbon fiber genesis and settled for a regular genesis