WTB Leopard 4082 2200kv

[RCKong]

Looking for a new or like new 4082 or a 4074 2200kv leopard.

RCK

[tiqueman]

B, what are you going to put it in?

Missed you today man, its been a while.

[RCKong]

My P Mono motor died...need to replace it.
I hear ya bud... Ray, Rich and I ran down here yesterday.

[tiqueman]

Ive got the 4082, 2200 motor in my P-mono, and Im thinking about changing it. I read posts from Deisel and others that are running the 4074, they are going just as fast, swinging larger props and running a lot cooler. Ive tried timing etc etc and cannot keep this motor cool and EVERY time Ive gone out, Im de-soldering 5.5 bullets off the motor to esc connection. I ordered some 6MM off ose last night. I have quite a few caslte 6 or 6.5?, but only the male side and ose is out of stock on them. I also got 3 pair of 8mm to try. My bullets are approaching 170F when temping them on the bench after a heat. Im thinking of trying different power and if it works doing something different w/ my 4082, or even going to a 4074. Maybe I just got a bad motor, I dunno, but I can tell you Im not happy w/ it.

[RCKong]

Yep that's what keeps happening to me also 5.5's 6.5's or 8's probably won't matter. I soldered with high temp solder 425* and they still come apart yesterday. Now the motor is toast. After I re-soldered it again, it started smoking and was hot on the bench, and cogging badly. Well at least I got over 20 plus runs on the motor before I killed it.

[tiqueman]

Ive got about 8 on mine, hopefully its ok when I get it back together. Were you running that 23?? that some of us got from Steven, the blue one?

[RCKong]

No I killed that one also. Might go to 2 - 4s 4000's to cut down on weight. this problems did not start until I went to 4s2p

[ray schrauwen]

Ive got the 4082, 2200 motor in my P-mono, and Im thinking about changing it. I read posts from Deisel and others that are running the 4074, they are going just as fast, swinging larger props and running a lot cooler. Ive tried timing etc etc and cannot keep this motor cool and EVERY time Ive gone out, Im de-soldering 5.5 bullets off the motor to esc connection. I ordered some 6MM off ose last night. I have quite a few caslte 6 or 6.5?, but only the male side and ose is out of stock on them. I also got 3 pair of 8mm to try. My bullets are approaching 170F when temping them on the bench after a heat. Im thinking of trying different power and if it works doing something different w/ my 4082, or even going to a 4074. Maybe I just got a bad motor, I dunno, but I can tell you Im not happy w/ it.

Maybe it's meant more for hydros & less weight?

I'm going to try mine in a whip 20... 4082 that is...

[ron1950]

scott how is chris's 4074 2000 doint in his pursuit?

[tiqueman]

Maybe it's meant more for hydros & less weight?

I'm going to try mine in a whip 20... 4082 that is...

scott how is chris's 4074 2000 doint in his pursuit?

Seems to be just fine, which is why I dont understand how a 4082 would be struggling. And hes running the 2200. He sold me his 2000 a while back, I sold it in my Genesis. But even he forgot that.

[ron1950]

i have the 4074 2200 in my pursuit we can see what temps it gets sunday next