WTB Rigger

[jpracing1997]

I am looking for a rigger of some type! Fiberglass or wood. 2 cell on up!

[Chuck E Cheese]

do you want with or without motor/esc? i have a jae i would part with. i ran it on a neu 1415 and cc240 but would rather sell it without the motor/esc. here is the build thread, it has been used since then so if you are interested i can send you some new pictures. there are a few scratches on the sponsons from loosing the radio and beaching it in the sand. i am looking for about $150 plus shipping for it less esc, motor and prop

http://forums.offshoreelectrics.com/...highlight=1415

i also have a jae 12 with ul-1 motor/esc for $300 shipped
http://forums.offshoreelectrics.com/...&highlight=jae

[teach]

IF Jp passes on the .21 I would love to talk to you about it.

[jpracing1997]

Send me some new pics please.

[HOTWATER]

Chuck has built some nice riggers....might be worth your interest....

[Chuck E Cheese]

i will try and get you pictures of its current state tomorrow. it is all good just a few scrapes..

THANKS HOTWATER!

[Killer V]

WTB Rigger

Would you have any interest in a Matrix Rigger.
The main tub is 25" by 3 3/4". Sponson width at 16"
Setup for P-Hydro, with a brand new Castle 120 esc, a 1515 1y with brand new cooling jacket. Also Spektrum receiver on board. It also comes with the Feiago 540xl 7 and cooling jacket. Right now she is sporting an Octura x440 prop.

Bind to your radio and add a battery, you rtr.

Killer V

This post has been amended to show a 1515 1y as I previiously stated it was a 1.5y.
Thank you for bringing it to my attention

[JMSCARD]

Would you have any interest in a Matrix Rigger.
The main tub is 25" by 3 3/4". Sponson width at 16"
Setup for P-Hydro, with a brand new Castle 120 esc, a 1515 1.5y with brand new cooling jacket. Also Spektrum receiver on board. It also comes with the Feiago 540xl 7 and cooling jacket. Right now she is sporting an Octura x440 prop.

Bind to your radio and add a battery, you rtr.

Killer V

that looks like a very nice rigger jeff!... so a 1515 1.5y? you run 6s in the rigger? the 1.5y is a 1500kv motor? very nice boat btw...

[Killer V]

WTB Rigger

JMSCARD,


The P class is only 4s. Plus there would be no room. And the prop rpm would be way too high. I tested it last year with the 540 xl 7, which has 100 rpm higher. I would say she ran in the low 50's. But the 540 xl you can buy for $70.00. The Neu 1515 1y is a much more expensive motor and I think will perform much better.

Killer V

[JMSCARD]

JMSCARD,


The P class is only 4s. Plus there would be no room. And the prop rpm would be way too high. I tested it last year with the 540 xl 7, which has 100 rpm higher. I would say she ran in the low 50's. But the 540 xl you can buy for $70.00. The Neu 1515 1y is a much more expensive motor and I think will perform much better.

Killer V

right on jeff... in your other posting you said NEU 1.5y.... thats why I asked about the 6s.. thought you meant 1y... well let us all know what ya want for it if the original OP passes... :)

[jpracing1997]

money

What kind of money?

[tiqueman]

Ive got an ose members H&M here at my house that hes thinking of parting with. Its been stripped, carbon fibered and began to repaint it. Its kinda mid project, would have to be re-assembled. Hull, hardware and a Hacker 8XL. Id think he'd let it go pretty reasonably

[jpracing1997]

What kind of money on both of yalls boats? Send me a pm

[Killer V]

WTB Rigger

jpracing1997,

I have sent you a PM regarding pricing. You have 1st shot at it.
Since it is your thread.

Killer V

[jpracing1997]

I
'm gonna pass on this one. Thanks