Miscellaneous items needed

[johnmaclean]

I'm looking for one of the following used or I mean previously-enjoyed items to putter around with while we wait for the waterways to thaw here in southern Ontario. I have a couple of sv's that I'm getting ready for the spring.

port turn fin --- sv27
grimracer 40/52/3 prop or equivalent TFL??
Liposhield
SV27R Decals for white boat

[ENCORE MAN]

Hi John, I am parting out a nearly new sv27 ( green) It has a decal sheet for green but is not a SV27 R .It is red, black and blue and would look good on a white boat. I have a turn fin, x 442 prop and all the hardware except the stinger. LMK what you need. Also, LMK if you are using Aquacraft Rados as I can give you one to use as a backup. BG

[ENCORE MAN]

Hi John, the decal sheet says( white hull) on it. I still have a turn fin for you but the part boat was sold. I have many sv27 parts, LMK what you need. Hope your baking in Jamaica. BG

[johnmaclean]

yeah, mon Jamaica was amazing. Tough to return to -4* celcius and a small snow storm.


Re: the stuff I'm looking for:

Decal sheet --- As far as the decal sheet is concerned, the step-son is determined to have is boat look like the white SV27R. That means black decals. He will probably order the decals and remove the "R".

Turn fin ---- Let me know what you want for the port turn fin because I'll be needing one to install on his boat once we have painted it.

Teflon liner. I damaged the liner when I tried to remove it from my original boat. Someone had epoxied the stuffing tube into the strut and I had to apply a little heat to remove it. Actually I was operating under the assumption that there was no liner in there at all and was surprised to discover a piece about 1.5 inches long.

Prop --- I heard back from Jan at Kintec who told me that TFL doesn't make a 40/52/3. Too bad because I do like their props and they are a very reasonable price. My first boat came with a Grimracer prop but I have not used it since the motor and esc were damaged when the endbell came off the motor. The boat has a 2300kv HK motor now and 90 amp ESC so I'm using one of the smaller TFL props I picked up from Kintec. I'll be installing the Grimracer prop on the boat from you and am looking for something like it for my step-son's boat.

Thrust bearing --- I've installed one on the HK motor and want to install one on each of the two other boats.

AM radio --- As far as the radio is concerned we have a couple of them around since I purchased a couple of HK 2.4GZ FM radios. I was experiencing some interference with the AM setup when Mark and I were running our boats on the river near Trent University. I've kept my AM as a backup. I'll be picking up another FM radio for the sv I am purchasing from you in the spring.

John