WTB p-mono motor

[6S HYDRO]

looking for some ideas for a p-mono motor besides the 1521 1.5d, what are some other european options

[b.mcdaniel.2009]

I've got a German motor Lehner 2250 11 turn with jacket and 4" rail mount........

[yurkanip]

Castle 1518 on 4s2p.

cheap as hell right now, with the sale. I am picking one up for my df cyberstorm.

[6S HYDRO]

1518 just wont hold up to the other 1521 1.5d powered setups, and lehner setups. anybody know what the good lehner motor is for a p-mono( 4s2p boat)

[yurkanip]

OK..if you already know what the 1521 1.5d motor will handle or not handle, why are you asking for comparisons?
trying to help you out. since you are in the US, and not europe. I think you are misjudging what the castle motors will do.

[6S HYDRO]

i know everybody already runs that setup in p-mono, but some guys are running lehner motors, im wondering which one

[RCKong]

ask Mudl... I know they run Plettenburg's also in Europe

RCK

[Fluid]

One problem with "what they run in Europe" is that the racing they do is not like we run in NA. Most of their running is for far longer than a typical sprint race heat, so their setups are usually milder. A European race setup might be rather slow over here.

The Lehner 2240 motors are somewhat equivalent to the 1521s, but being 2-pole motors you would normally choose a slightly lower Kv. When the Neus were first introduced we found we needed to use a Kv 15% to 25% higher than the 2-pole motors.



.

[DISAR]

Lehner motors are very powerful and good quality, same as NEU motors but NEU are cheaper.

as far as I know and please correct me if I am wrong, in Europe a p-mono is a mono-2. Normally they are lighter,smaller,stepped (than a df33 for example) and prefer smaller props-high rpm-high kv and normally use the 1950 series.

[6S HYDRO]

yeah I dont care what they run in europe, i wanna know what the US guys are runnin in the p-mono class other than 1521 1.5d.

Fluid You say the 2240 series but what turn

[HOTWATER]

I am putting together a mono for P-Spec (IMPBA)....I will be using a Neu 1515 1Y (2200 KV)....

-Kent

[steveo]

hacker c-50 xl are quality motors would make for a good p-mono motor an 8/9 turn