WTB Large Hull

[JMSCARD]

a df40 mono with a 1527 NEU is good for low 60's a 2215 to the 70's and a 2230 to the 80's.....

[b.mcdaniel.2009]

a df40 mono with a 1527 NEU is good for low to mid 60's a 2215 to the 70's and a 2230 to the 80's.....

She'll handel those speeds? My main concern is bein able to run 40-50mph is 6"-12" shoppy water.

[JMSCARD]

http://forums.offshoreelectrics.com/...ht=delta+force

check out the vid and read the thread.... it may answer a few of your questions... :)

heres the second vid with a samller prop and some cutting around.....

http://www.youtube.com/watch?v=FG5G1uPIIXw

[FighterCat57]

She'll handel those speeds? My main concern is bein able to run 40-50mph is 6"-12" shoppy water.

Think about that by scale. How may speed boats do you see in 12 foot waves? 1/10 scale, do the math; 50" boat simulating a 50' boat, so a 12" wave would be a 12' wave.

It get's pretty desolate here at the inlet when the waves get up to 6' or more and certainly aren't any regular boats doing 50mph in 6' chop.

I've been working on a gasser for this very thing, but speeds in the 40ish range and room for lots of acceleration and part throttle running. On/off the throttle constantly to adjust to rapidly changing water conditions. I've boiled it down to the Express GTX or Aeromarine Apache. Again both in the 60 inch range and gas as there will be TONS of throttle manipulation and runtime's needed in the 20-30 minute range.

[westbeach]

I would stay away from the DF40 and get the DF Sniper 45 instead. Deeper vee, handle chop much better. To answer your question.

She'll handel those speeds? My main concern is bein able to run 40-50mph is 6"-12" shoppy water.

[b.mcdaniel.2009]

Any vids of the DF 45".

[JMSCARD]

Heres anbjorn's:

http://www.youtube.com/watch?v=Svp46WlpU34&feature=mfu_in_order&playnext=1&videos=8PArLlLmim4

Heres KevinLews:

http://www.youtube.com/watch?v=pKrhc0Dbo6U&feature=related

Heres Peter Zichas:

http://www.youtube.com/watch?v=FvdJ_e8gKWg&feature=fvw

Each of these guys has +/- $3000 on the water

[b.mcdaniel.2009]

I would stay away from the DF40 and get the DF Sniper 45 instead. Deeper vee, handle chop much better. To answer your question.

Why would you say that?

[Rumdog]

Well, it is a fact. That's why he'd say that..

[westbeach]

What Nick had said too! Because I have a DF Cyberstorm, and it is a deeper vee than the DF33, as well as watching a few members here build and run the Sniper. as JM had posted links to.

Why would you say that?

[westbeach]

It's even stated here. http://www.offshoreelectrics.com/pro...prod=df-sniper, I know it is stated for the DF41 as well but it is not a true deep vee.

[b.mcdaniel.2009]

When will the df 45" be back in stock?

[tborisch]

WOW!! Amazing boats. That turbine cat is wild. Whats in that boat like $15K?

Just north of $19k. There is a lot to it that you don't see.

Tom

[b.mcdaniel.2009]

Still looking!

[befu]

40" and 52" mono's

http://forums.offshoreelectrics.com/...+kevlar+carbon

Look at last two post in this thread, is this anythng like what you are looking for?

The 40" is a mid vee. The 52" is a true 24 degree deep vee design with a sharp entry, eats rough water.

Brian