common $100 today takes this lil jewel
DF Mini Vortex Hydro
Collapse
X
-
Interested
What is the length of the hull? Is it like or the same as the one that minicatracing sells?
so what is left, the hull, rudder, strut, drive shaft, motor mount?
Servo?
How long of a 2s battery could you fit in the front. I have some 2200's, but I think they are about 108mm long. Will go check.Comment
-
What is the length of the hull? Is it like or the same as the one that minicatracing sells?
so what is left, the hull, rudder, strut, drive shaft, motor mount?
Servo?
How long of a 2s battery could you fit in the front. I have some 2200's, but I think they are about 108mm long. Will go check.
all it needs is an esc a motor and radio
yes servo and linkage are included
i can include a brushless 3600 kv motor for another $20
and two 2s lipo's that are pictured for another $15SPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures SocietyComment
-
hull sold
OK, I will take the hull for the $90 del..
Lipos I have been buying the turnigy 2200's for $11.16 at hobby king, so I will stick with those. (trying to set up all my boats for the same battery packs!
The motor I was looking at the turnigy 2835 3600 for $20. Does yours have a cooling ring with it or did you sell that with the other motor? If it is comparable to the turnigy and has the cooling ring, I will take yours.
Let me know. I am logging off now, must sleepI will send paypal tomorrow in the am sometime.
Thank you, Brian
this the hull.......slightley bigger than a minicat http://www.offshoreelectrics.com/pro...=df-deltaminih
all it needs is an esc a motor and radio
yes servo and linkage are included
i can include a brushless 3600 kv motor for another $20
and two 2s lipo's that are pictured for another $15Comment
-
Brian
My motor is the turnigy you are referring to and has the built in water jacket
Your lipos will work fine
My paypal is [email protected] please add 3% for pay palSPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures SocietyComment
-
Brian I got your payment but are you sure you got the model number right on the turnigy motor?....mine is BL2845=3600 not 2835 like you stated
here is my motor
http://forums.offshoreelectrics.com/...rushless+motor
lmk before i box it upSPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures SocietyComment
-
its here
showed up, shipped fine. Looks great, good project to finish up.
The motor shaft was a bit stiff (dragging)? I put some oil on it and got it to spin freely, so it should be good. I know you mentioned this motor sat for awhile, so this is not surprising. First run should loosen it up the rest of the way, still feels smooth.
Thank you for the extras!
BrianComment
-
showed up, shipped fine. Looks great, good project to finish up.
The motor shaft was a bit stiff (dragging)? I put some oil on it and got it to spin freely, so it should be good. I know you mentioned this motor sat for awhile, so this is not surprising. First run should loosen it up the rest of the way, still feels smooth.
Thank you for the extras!
BrianSPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
EX President of the Offshore FE Vultures SocietyComment
Comment