wtb neu1521/1.5D 1860Kv

[U.L. HYDRO DRIVER ICE]

wtb neu 1521/1.5D 1860Kv would like with cooling jacket if possible or consider 1527 1d 2160kv this is for my 1/10 scale

[Fluid]

I have a custom 1527/1D in excellent condition, 1/8" shaft end (8mm inside), no jacket though. They sell new for $260 at OSE. I'll sell it for $200 shipped. The only problem is I am out of the country now and couldn't ship it out until next Wednesday. LMK.





.

[U.L. HYDRO DRIVER ICE]

Thanks but I would need the 8mm end

[Fluid]

...and that is because? Not being rude here - the Octura flex couplers for 5mm shafts are usually better/truer than the ones for 8mm shafts. The 5mm shaft is plenty strong for 3/16" cable. Up to you....




.

[SLAUGHTER_AUS]

Fluid the engine you are talking about would that work in a 33" cat on 4s

[U.L. HYDRO DRIVER ICE]

...and that is because? Not being rude here - the Octura flex couplers for 5mm shafts are usually better/truer than the ones for 8mm shafts. The 5mm shaft is plenty strong for 3/16" cable. Up to you....




.

p m sent

[U.L. HYDRO DRIVER ICE]

bump anybody wtb neu 1521/1.5D 1860Kv would like with cooling jacket and possible motor mount thanks

[U.L. HYDRO DRIVER ICE]

bump anybody with cooling jacket and motor thanks

[U.L. HYDRO DRIVER ICE]

bump anybody for a 1521 1860kv neu or possible 9xl thanks

[Doby]

I trhought you had an offer from Ray F for a 1521 on the RRR forum???

[Gary]

[QUOTE=Fluid;111406]I have a custom 1527/1D in excellent condition, 1/8" shaft end (8mm inside), no jacket though. They sell new for $260 at OSE. I'll sell it for $200 shipped. The only problem is I am out of the country now and couldn't ship it out until next Wednesday. LMK.



fluid on your custom motor what is the KV of this motor and what else was done to it. thanks

[Fluid]

It was custom ordered and took four months to get last year. The only thing not normal was the stepped down 5mm output shaft. At the time it was tough to get a 8mm coupler that didn't have too much runout, so I opted for the 5mm as I had plenty of straight 5mm couplers. The 5mm shaft is plenty strong - it's stronger than the 3/16" cable or the 3/16" stub shaft.



.

[Gary]

and thats 2300 kv ? Some sites say 2160 kv but im pretty sure there 2300 kv. Let me know, thanks, Gary

[Fluid]

Your guess is as good as mine. The folks who sell them - Castle Creations - say 2160 rpm. The folks who make them - Neu Motors - say 2300 rpm. 6% is not enough to make any real difference, it is still a very high performance 4S motor


.

[Gary]

4s ? What about 6s? Anybody ever run that much with that motor. Would be real interesting.