UL-1 For Sale!!!

[nate]

UL-1 FOR SALE

Almost New UL-1, This boat is Well taken care of, and Highly modded and will run High 50's...Low 60's. This boat has been ran exactly 12 times on a set of Flight Power 5s lipo's. The hull is almost near perfect, the Turn Fin bracket area has been fixed and will not crack under stress. The boat packs a Neu 1515 1.5y- Hydra120- and a new s&B M447 octura prop, a Thunder Power lipo reciever pack, Hitec metal gear servo, Octura Flex cable, Almost brand New GPS eTrex, octura coupler, and a tactic 2.4ghz radio system. This boat will come RTR, Just add 4-5s lipos and have fun.
This boat ran 58.8mph Oval laps with the Turn fin, and 60.7mph without Turnfin.
The boat should run low 70's on 6s and prop swap.

The ESC has been checked everytime the boat was ran and will run 7-10 Oval laps and hold temps less than 142d/f no problem...Wires are never over heated and the motor stays a low temp of 114-126d/F.

The boat will be guaranteed to work perfectly when you recieve it..bulletproof, and the Hydra is already programed and ready to go.

I have over $1,500.00 in this boat and Its a bada$$ boat to run.. Please no low offers, and dont ask to split anything apart.

Paypal Only: US SHIPPING ONLY!!!! Insured for any amount asked for, Fedex Shipping, please allow me 10 business days to get it shipped to your door.

$785.00 RTR

RTR W/5S lipo's- $875.00 shipped!

or: RTR W/lipos and Hyperion AC/DC charger for $955.00

(Pic's were taken today-July 3rd 2009)

Need more info or pics feel free to ask
=============================================
=============================================
=============================================

[nate]

[nate]

[nate]

[nate]

motor - esc - inside pics-

[nate]

[nate]

[nate]

Pictures Tell the truth!!! haha

[Chuck E Cheese]

it is too bad you bad mouthed me and told me no less than $1000 a few days ago. for $875 i would have considered it.... but too late now!
i guess you were wrong when you said i have more mouth than money, i allready ordered everything to build one just like based on your build thread. it will be brand new and oddly enough i paid with money...

[MonsterMaxx]

how did you get $1500 into it?

I mean, I just got a nice deal on a new ul1 and am going to trick it to the max running on 6s, I'm seeing about $500 when I'm done.

Granted I already had a Nomadio tx/rx, 6s packs and lots of better servos laying around, but still, how'd you manage to spend $1500 on it?

Not trying to be a wiseazz or anything, just wondering what kool parts I'm missing for the extra grand.

[Chuck E Cheese]

he told me he paid $300 for a $210 motor, $50 for a $20 prop, $200 for $170 esc...... get the picture. i ordered all the same parts including a new boat, motor, servo, esc, flex and coupler for about $850 shipped. i will sell the tx/rx - motor and esc bringing it to about $700 without batteries. he probablly has the additional $650 in the turn fin and gps....

[Brushless55]

he told me he paid $300 for a $210 motor, $50 for a $20 prop, $200 for $170 esc...... get the picture. i ordered all the same parts including a new boat, motor, servo, esc, flex and coupler for about $850 shipped. i will sell the tx/rx - motor and esc bringing it to about $700 without batteries. he probablly has the additional $650 in the turn fin and gps....

$650 in the turn fin and gps....

[MonsterMaxx]

Sounds like he was shopping at my LHS. They are a ripoff, in a pinch I buy glue from them.
$200 for a hydra 120 is crazy, I found a dealer selling them for $140 w/ free shipping. I think I'm getting the $105 180A chinee one. Too many stories of you folks running on the ragged edge with the castle and cooking it. Cheaper w/ more headroom sounds good to me.

Is that motor really that much better than the $70 feigao XL? My current plan is for the xl13 (mine will be running 6s.)
I can see getting ONE pro sharpened and polished prop to see how it's done = $50 or more, after that, I'm going for the bare ones & do it myself.
That gps is on feebay nib for $75, used $40ish

I just can't see much more than $500 in my UL1, then again, I'm pretty careful with my money and don't mind doing some careful shopping.

Chuck, which flex and coupler did you get? I think I need one too.

[Chuck E Cheese]

i am using .150 octura. also the neu motors are worth the $. the 13xl is great on 6s but i think that will be tight in this boat (i haven't got it yet so i dont know). the castle also worth it, they are only probs if over amp's
check out the build threads on the UL-1 as this isn't the place to discuss it

[nate]

he told me he paid $300 for a $210 motor, $50 for a $20 prop, $200 for $170 esc...... get the picture. i ordered all the same parts including a new boat, motor, servo, esc, flex and coupler for about $850 shipped. i will sell the tx/rx - motor and esc bringing it to about $700 without batteries. he probablly has the additional $650 in the turn fin and gps....

I based this on Brand new parts if you were to build one new.

And the motor was a mistake I added water jacket, motor together and it came to over 300.00.

Im glad you bought the stuff to do it yourself... I await the project pictures and videos...

Considering you took the time to copy my little setup...

Also Id let anyone get a good deal as to a smarta$$ throwing out odd emails stating your interested in my UL-1, then down me cause my price...

Some people work for there builds ect... cant just let it go cheap...