FS Feigao 10XL & 2 other brushless motors

[Chuck E Cheese]

i have 3 motors for sale: - ALL ITEMS GONE

Feigao 10XL with OSE XL waterjacket installed and sealed. this has been run in a delta force 29" mono about 5 times. i went to a SV motor to run our spec class and no longer have a use for it. bearings are tight and smooth and has no play in the rotor. 5.5mm male bullets installed. $50 plus $10 usps priority shipping in the US. GONE _ WENT IN A DF 29
this is a turnigy 36-50-2300 this has the same specs as the ammo 2300 and works just as well for half the price. it is new, never used with no connectors, the stock ones were removed to install larger ones. $20 plus $10 usps priority shipping in the US - SOLD

this is a used turnigy 28-45-3600 with built in water cooling. it was used about 10 times in a delta 26" on 3s with good results. the bearings are smooth and has no play in the rotor. no connectors. $20 plus $10 usps priority shipping in the US. this motor has a 4mm shaft, i have a 4mm to .130 stainless coupler for an additional $7 - sold

trades and reasonable offers considered

[LiPo Power]

what is wrong with this pictures?

[bustitup]

G

i have 3 motors for sale:

Feigao 10XL with OSE XL waterjacket installed and sealed. this has been run in a delta force 29" mono about 5 times. i went to a SV motor to run our spec class and no longer have a use for it. bearings are tight and smooth and has no play in the rotor. 5.5mm male bullets installed. $50 plus $10 usps priority shipping in the US.

this is a turnigy 36-50-2300 this has the same specs as the ammo 2300 and works just as well for half the price. it is new, never used with no connectors, the stock ones were removed to install larger ones. $20 plus $10 usps priority shipping in the US - SOLD

this is a used turnigy 28-45-3600 with built in water cooling. it was used about 10 times in a delta 26" on 3s with good results. the bearings are smooth and has no play in the rotor. no connectors. $20 plus $10 usps priority shipping in the US. this motor has a 4mm shaft, i have a 4mm to .130 stainless coupler for an additional $7

trades and reasonable offers considered

Which picture is the $20 motor would it fit standard 540 motor mount

If so. $25 with coupled and ship it wiyj my lipos?

I want to use it in my shockwave 26 recovery boat

[Diegoboy]

Both gold motors are $20 motors. The 3600 has built in water cooling which explains the funny shaped can.

Yes the $20 will fit standard mounts.

I can't answer the rest

[Chuck E Cheese]

the last picture is the 28mm $20 motor. it is a 380 and has the same spacing as the narrow holes on a SV motor, not sure if it will fit a shockwave mount. and if you want it it is $27 with coupler and will be in the same package as the lipo's, otherwise if not paid before the batteries ship it is $35

[bustitup]

the last picture is the 28mm $20 motor. it is a 380 and has the same spacing as the narrow holes on a SV motor, not sure if it will fit a shockwave mount. and if you want it it is $27 with coupler and will be in the same package as the lipo's, otherwise if not paid before the batteries ship it is $35

I will take the motor and coupler for 27........do you hapn to have a cheap esc with reverse?

[thundercat]

10xl

would that 10xl be a good replacement motor in an sv 27 ??

[bustitup]

pp has been sent for Turnigy 2845 3600kv motor and coupler

[sailr]

Yes

would that 10xl be a good replacement motor in an sv 27 ??

[Chuck E Cheese]

10XL still for sale

[Chuck E Cheese]

bustitup - pp recieved, motor and lipo's on the way... thanks

[thundercat]

10 xl

you have a pm

[Chuck E Cheese]

$55 thundercat and it is on its way... pp [email protected]

[Chuck E Cheese]

PRICE REDUCED - $50 shipped usps priority to the US

[Chuck E Cheese]

PRICE REDUCED - $40 shipped usps priority to the US