Tweet
SOLD
For sale is my 38" Outerlimits RSV Raptor carbon fiber V-bottom Twin. The hull was built by Denis Olivier Mainholt in Germany, who did the graphics as well. This is a rare, double carbon layup, done at my request for SAW racing. The exterior is a blue gel coat with an exposed seam. The canopy is black fiberglass and will pass GPS signal.
This boat was built to be my 6S V-bottom mini shootout boat. No expense spared and strength was paramount. It is damn near as bullet proof as a hull gets. It has been reinforced with a 2mm CF transom doubler, and 2-part poured foam under the deck.
Motors: Lehner 1950/5 LK 2508kV 36x82 5mm carbon wrapped shaft, 2pole, RocketRC 36L 61mm water jacket w/ custom CF wrap, MBP 5/4.7 motor collet, Frederick Kopp custom 36mm CF&aluminum twin motor mount
ESC's: Castle MMX8S ESC w/ StumpFab water cooling kit, Castle 6.5mm bullets, 8S max, 8mm OSE anti-spark battery connectors
custom CF ESC mounts
custom CF battery trays
MTC Power Trim 5 Long 90mmL 4.75/4.75, black anodized drives
Octura .187" flex cables
MTC Rudder 2 V2 119mm, 110mm blade, black anodized
Spektrum S6230 311oz digital servo
custom CF servo mount
Spektrum dual servo horn
CF steering push rods w/ aluminum ball joint ends
TFL black turn fins, black anodized
TFL M3 black hatch locks
There are $3,000 in top of the line parts alone in this build, not including the countless hours of meticulous build labor. It still needs cooling lines, ESC to motor wires, a receiver and antenna mount, battery straps, batteries, and props to complete it.
SOLD
PXL_20250301_162130051.jpg PXL_20250301_162146660.jpg PXL_20250301_162206362.jpg
For sale is my 38" Outerlimits RSV Raptor carbon fiber V-bottom Twin. The hull was built by Denis Olivier Mainholt in Germany, who did the graphics as well. This is a rare, double carbon layup, done at my request for SAW racing. The exterior is a blue gel coat with an exposed seam. The canopy is black fiberglass and will pass GPS signal.
This boat was built to be my 6S V-bottom mini shootout boat. No expense spared and strength was paramount. It is damn near as bullet proof as a hull gets. It has been reinforced with a 2mm CF transom doubler, and 2-part poured foam under the deck.
Motors: Lehner 1950/5 LK 2508kV 36x82 5mm carbon wrapped shaft, 2pole, RocketRC 36L 61mm water jacket w/ custom CF wrap, MBP 5/4.7 motor collet, Frederick Kopp custom 36mm CF&aluminum twin motor mount
ESC's: Castle MMX8S ESC w/ StumpFab water cooling kit, Castle 6.5mm bullets, 8S max, 8mm OSE anti-spark battery connectors
custom CF ESC mounts
custom CF battery trays
MTC Power Trim 5 Long 90mmL 4.75/4.75, black anodized drives
Octura .187" flex cables
MTC Rudder 2 V2 119mm, 110mm blade, black anodized
Spektrum S6230 311oz digital servo
custom CF servo mount
Spektrum dual servo horn
CF steering push rods w/ aluminum ball joint ends
TFL black turn fins, black anodized
TFL M3 black hatch locks
There are $3,000 in top of the line parts alone in this build, not including the countless hours of meticulous build labor. It still needs cooling lines, ESC to motor wires, a receiver and antenna mount, battery straps, batteries, and props to complete it.
SOLD
PXL_20250301_162130051.jpg PXL_20250301_162146660.jpg PXL_20250301_162206362.jpg
Comment