Extra boats, ESC's and motor

[IGGY_357]

JAE 21GT with Leopard 3060 X2 2380kv OSE 150A just add radio and battery 200$ plus ride Sold

JAE (not sure of the model) with Leopard 3660 X2 2380kv Turnigy 120A just add radio and battery 200$ plus ride SOLD

Aquacraft 60A 40$ plus ride. Removed this from a used boat. No history known.S

Turnigy 180A 60$ plus ride. Removed this from a used boat. No history known. Sold off site

Castle 1520y 1600kv 100$ plus ride. Removed this from a used boat. No history known. Sold

Phoenix Edge 200A 200$ plus ride. Bought this new for testing purposes, never hooked up to power. Went a different direction.

[IGGY_357]

JAE Model? SOLD

[IGGY_357]

Jae 21gt

[Bande1]

damn steals on those riggers. Wish I didnt just build a promod zenoah

[tjsb]

JAE (not sure of the model) with Leopard 3660 X2 2380kv Turnigy 120A just add radio and battery 200$

Have you run it ?If so how well did it run cause I counldnt get mine to run well at all.
Shipping to 37938?

Thanks Tom 847-514-7876

[IGGY_357]

JAE (not sure of the model) with Leopard 3660 X2 2380kv Turnigy 120A just add radio and battery 200$

Have you run it ?If so how well did it run cause I counldnt get mine to run well at all.
Shipping to 37938?

Thanks Tom 847-514-7876

It has been run numerous times. Done ok at races. I'm no hydro expert by any means. Shipping looks to be from 30-75$ I'll PM a screenshot of shipping.

Isaac

[tjsb]

So speed in 3s or 4s running?

Give me a call when you have time.

Thanks Tom 847-514-7876

[IGGY_357]

I can't figure out how to attach a pic in a PM........
I can post it here if you'd like.
Isaac

[Bande1]

So speed in 3s or 4s running?

Give me a call when you have time.

Thanks Tom 847-514-7876

a JAE should run around 55mph with a p-limited setup

[RCKong]

Isaac, I'll take the JAE rigger. I'll plan on getting it from you on the 6th.
Thx, Brian

[IGGY_357]

Sounds good. I'll see you @ the pond

[IGGY_357]

Bump

[IGGY_357]

Open to offers

[BigMarkD]

IGGY does the Castle motor show outward signs of abuse ? ie: rust due to poor care, ragged wires ? Please give me a bottom dollar, I do not want to offend you. Building a Q rigger and ned something to mock up and test with. Thank You, Shipping will be to Mississippi Gulf Coast, 39520, if we work something out.

[IGGY_357]

Other than a few scratches, I'd say it looks as good as new.
As for offending me, I'm not sure it's possible.

Isaac