Van's Racing Hornet OPC Tunnel w/ FE Conversion - Ready to Race

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Darin Jordan
    Fast Electric Addict!
    • Apr 2007
    • 8335

    #1

    Van's Racing Hornet OPC Tunnel w/ FE Conversion - Ready to Race

    Van's Racing 34" OPC Tunnel w/ complete FE conversion. Built from the ground-up for racing and Time-Trials. Currently setup for 6S (which is all you should ever need).
    Look over the pictures and let me know if you have any questions.

    Here are some details:
    MOTOR: TP 40x82mm 1570KV
    ESC: Castle Creations Hydra-ICE 240 w/ custom water-cooling conversion
    SERVO: Spektrum High-Torque Metal Geared Digital
    LOWER: K&B 7.5 Modified w/ FE Conversion

    I can offer this in a few different packages:
    1) ARTR, no batteries or radio gear. Just the boat as it's shown in the pictures. You'd have to add your RX/TX, and supply a 4S or 6S battery setup. I can send you some matching 5.5mm contacts to connect to the ESC. $1250.00 plus shipping

    2) ARTR with Batteries but no RX or TX (batteries are brand new (only used to set this up on the bench) and already setup for this hull. I just cycled them during my winter battery-maintenance routine. You'd need to add the Radio and RX and set the ranges on the ESC, which isn't difficult and likely would work just with the default settings. $1350.00 plus shipping

    3) RTR, complete with Batteries and a nice, pretty much new, Spektrum DX5R Radio TX. Would be bound, setup, and literally RTR. Just add prop and driving skill. $1500.00 plus shipping

    I don't have an appropriate prop for this yet, and am not sure ultimately what that would need to be, Something in the Octura 1450 size-range would be a good place to start.

    This is a BEAUTIFULLY BUILT boat, and was built to my own high-standards to use for NAMBA Time-Trials, but I just don't see myself having time to use it in the next couple of years. Better it not just sit on the shelf.

    I'd expect shipping to be at least $100.00 due to the size/weight of a safe packaging setup, and I'll only ship within the USA. The last hull I shipped, an un-built Lynx, was $80.00 from WA to Florida... Shipping is a little insane these days.

    Let me know if you have any specific questions.

    Hornet_Finished_008.jpgHornet_015.jpgHornet_005.jpgHornet_001.jpgHornet_006.jpg
    Darin E. Jordan - Renton, WA
    "Self-proclaimed skill-less leader in the hobby."
  • Darin Jordan
    Fast Electric Addict!
    • Apr 2007
    • 8335

    #2
    More Pictures:

    Hornet_Finished_017.jpgHornet_Finished_014.jpgHornet_Finished_012.jpgHornet_Finished_011.jpgHornet_Finished_018.jpg
    Darin E. Jordan - Renton, WA
    "Self-proclaimed skill-less leader in the hobby."

    Comment

    • Darin Jordan
      Fast Electric Addict!
      • Apr 2007
      • 8335

      #3
      A few more:

      Hornet_008.jpgHornet_Finished_007.jpg
      Darin E. Jordan - Renton, WA
      "Self-proclaimed skill-less leader in the hobby."

      Comment

      • 2slicc
        Member
        • Jul 2021
        • 38

        #4
        man.. I need this but out of my budget for right now. So close too in WA.

        Comment

        • Darin Jordan
          Fast Electric Addict!
          • Apr 2007
          • 8335

          #5
          Some more pictures, taken earlier this week.

          20230319_195717.jpg20230319_195639.jpg20230319_195628.jpg20230319_195644.jpg20230319_195648.jpg
          Darin E. Jordan - Renton, WA
          "Self-proclaimed skill-less leader in the hobby."

          Comment

          Working...