Tweet
SOLD
Clearing room in the shop and regrettably selling my most reliable boat. It's a 34" carbon fiber TFL Cheetah twin setup for P-Cat racing on 4S. The boat was originally built and raced by Darin Jordan and was the 2016 national champion in its class. I've made a few modifications to improve reliability, clean-up the steering, and improve the interior looks. The interior seams were reinforced with fiberglass cloth tape. The hatch was inlayed with 2x2 carbon fiber twill. The motor mounts were reinforced with carbon fiber cloth. The sponson strut mounts and transom were both reinforced with aluminum plates and threaded mounting holes. The boat is agile and ready to race. Has a small spider crack on the bottom tunnel in the clear coat and two small stress cracks in the clear near the base of the windshield that appeared prior to the canopy inlay. I'm including two pairs of 4S 5000mAh lipo's w/ MBP adjustable trays. All you need to add is a transmitter, receiver, and props. The Futaba receiver in the pictures is not included.
$800 plus UPS ground shipping.
Build list:
34" TFL Cheetah CF catamaran
SSS 3674 2075KV 4-Pole motors
SSS water jackets
TFL aluminum motor mounts
TFL 5/4.7mm stainless collets
OSE .187 HD flex cables
Dynamite 120A ESC
Castle 6.5mm battery connectors
TFL 3" setback rudder
Spektrum S6030 278oz digital servo
3mm steering push rod w/ MBP billet end
Integy 23T 16r aluminum servo horn
modified TFL Struts w/ lead-teflon bushings
OSE thru-hull water pickups
Large diameter silicone cooling lines
MBP adjustable lipo trays
TFL hatch locks and neoprene canopy seal
3.jpg 1.jpg 4.jpg 5.jpg
Clearing room in the shop and regrettably selling my most reliable boat. It's a 34" carbon fiber TFL Cheetah twin setup for P-Cat racing on 4S. The boat was originally built and raced by Darin Jordan and was the 2016 national champion in its class. I've made a few modifications to improve reliability, clean-up the steering, and improve the interior looks. The interior seams were reinforced with fiberglass cloth tape. The hatch was inlayed with 2x2 carbon fiber twill. The motor mounts were reinforced with carbon fiber cloth. The sponson strut mounts and transom were both reinforced with aluminum plates and threaded mounting holes. The boat is agile and ready to race. Has a small spider crack on the bottom tunnel in the clear coat and two small stress cracks in the clear near the base of the windshield that appeared prior to the canopy inlay. I'm including two pairs of 4S 5000mAh lipo's w/ MBP adjustable trays. All you need to add is a transmitter, receiver, and props. The Futaba receiver in the pictures is not included.
$800 plus UPS ground shipping.
Build list:
34" TFL Cheetah CF catamaran
SSS 3674 2075KV 4-Pole motors
SSS water jackets
TFL aluminum motor mounts
TFL 5/4.7mm stainless collets
OSE .187 HD flex cables
Dynamite 120A ESC
Castle 6.5mm battery connectors
TFL 3" setback rudder
Spektrum S6030 278oz digital servo
3mm steering push rod w/ MBP billet end
Integy 23T 16r aluminum servo horn
modified TFL Struts w/ lead-teflon bushings
OSE thru-hull water pickups
Large diameter silicone cooling lines
MBP adjustable lipo trays
TFL hatch locks and neoprene canopy seal
3.jpg 1.jpg 4.jpg 5.jpg
Comment