Fightercat carbon fiber Daytona

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BlakeT
    Senior Member
    • Jan 2020
    • 536

    #1

    Fightercat carbon fiber Daytona

    I have a new undrilled fightercat Daytona up for sale. I did epoxy in a motor mount but that can be removed if wanted to do twins instead. The boat is being sold with an neu 1527 .5y 8mm shaft from 2011 with HRC cooler on it. Price is $475, the motor alone from ose sells for $420. Shipping in US only and will be at buyer expense.
    Attached Files
  • Jesse J
    Former scale FE racer
    • Aug 2008
    • 7198

    #2
    How much for just motor & cooler?
    "Look good doin' it"
    See the fleet

    Comment

    • BlakeT
      Senior Member
      • Jan 2020
      • 536

      #3
      I would do 200 for the motor and jacket

      Comment

      • Jesse J
        Former scale FE racer
        • Aug 2008
        • 7198

        #4
        Ok, thanks. I just looked up the kv and I’ll pass, but that is a great deal given that 2011 is an ideal year for these motors! The quality isn’t what it was then.
        "Look good doin' it"
        See the fleet

        Comment

        • BlakeT
          Senior Member
          • Jan 2020
          • 536

          #5
          Yes that is very true! that is why I had mentioned the build date. If you are looking for a specific neu motor I might have one.

          Comment

          • BlakeT
            Senior Member
            • Jan 2020
            • 536

            #6
            Price drop $425

            Comment

            • Youngbuck
              Junior Member
              • Feb 2021
              • 28

              #7
              Is there actually enough room in there to do twins with those big ol tuna cans? And does ose still sell those if I wanted to do twins? I may be interested. Thanks Scott

              Comment

              • BlakeT
                Senior Member
                • Jan 2020
                • 536

                #8
                Are you asking if you can do twin 1527s? Or just twins in general

                Comment

                • Youngbuck
                  Junior Member
                  • Feb 2021
                  • 28

                  #9
                  Well can u set this up r twins with 1527s? And if not what size twins would be compatible?
                  also real quick, how hard is it to take that epoxy off and setup up for dual drive? Sorry for all the questions but I’m a green horn when it comes to boats. However I really do want a nice twin setup cause I have a bunch of 6s packs from my rc helicopters. Thanks

                  Comment

                  • BlakeT
                    Senior Member
                    • Jan 2020
                    • 536

                    #10
                    No problem at all! The twin 1527s may be possible but would be overkill I think. Maybe some 36mm motors or TP 4030cm motors would be great. The boat is 37 inches long but very light weight. Getting the epoxy off shouldn’t be to hard and since I never drilled any holes setting it up for a twin would be just the same as any other twin build

                    Comment

                    • 2turbofords
                      Member
                      • Dec 2019
                      • 49

                      #11
                      Would these be enough battery for this boat with the current motor setup? 16254613167043585580958941484326.jpg
                      Stiletto 29, Lucas cat, miss Geico 29, motley crew 6s, motley crew 4s, and counting

                      Comment

                      • BlakeT
                        Senior Member
                        • Jan 2020
                        • 536

                        #12
                        The MAH would probably be enough but that voltage is too high I think. The motor is 2500kv

                        Comment

                        • Alfa Spirit
                          Fast Electric Addict!
                          • Oct 2009
                          • 2131

                          #13
                          Twin setup for this beautiful catamaran :

                          - 2 x 2000kV motors and 2 x 5S bateries
                          or
                          - 2 x 2500kV motors and 2 x 4S bateries.

                          Motor size = 3670

                          Comment

                          • 2turbofords
                            Member
                            • Dec 2019
                            • 49

                            #14
                            Ok thanks,still new to the boat scene. Trying to utilize battery packs I have for RC cars already. 6s is the best I have for now. Appreciate your help guys.
                            Stiletto 29, Lucas cat, miss Geico 29, motley crew 6s, motley crew 4s, and counting

                            Comment

                            • Gregor
                              Junior Member
                              • Nov 2016
                              • 8

                              #15
                              Is this still available

                              Comment

                              Working...