Randy Rap Titanium Turn Fins

[Randy Rapedius]

OVER 1300 FINS SOLD since 2014

Randy Rap Titanium fins are made from .071 Ti-6Al-4V sheets. This is the same material used in the making of aircraft, spacecraft & missiles. Titanium is recognized for having the highest strength to weight ratio of all metals. It is also non-toxic, non-corrosive, and twice as strong as Aluminum yet weighs almost half that if Stainless steel.

Finished fins are very sharp and come with a clean satin finish. They have a hook unless you request a straight fin. They are ready to bolt into your existing mount. I do not supply the mount or bolts.

Prices are in US and includes regular shipping to the US and Canada. PayPal as Family/Friend to randy_rap@cogeco.ca

1/8th Scale - $89
Q Sport Hydro - $79
P & P Limited Sport - $69
Mono fins - $29, $39, $49

I also sell fins for nitro and gas boats.

[meangenesracing]

Bout time you went FE, LOL

[meangenesracing]

Randy Rap Titanium fins are made from .063 Ti-6Al-4V sheets. This is the same material used in the making of aircraft, spacecraft & missiles. Titanium is recognized for having the highest strength to weight ratio of all metals. It is also non-toxic, non corrosive, and twice as strong as Aluminum yet weighs almost half that if Stainless steel.

Finished fins are razor sharp and come with a clean satin finish. They come ready to bolt into your existing mount. Due to the thinness of the material, we have found an increase of speed and acceleration compared to the thicker and heavier fins out there. I have sold over 600 Gas boat fins. It is time for the FE crowd to experience Randy Rap Titanium Turn Fins.

Price is $75 US which includes regular air mail shipping to Continental US and Canada. Overseas add $4.00. PayPal is randy_rap@cogeco.ca

So would these be for P hydro or Q hydro?

[Randy Rapedius]

So would these be for P hydro or Q hydro?

Will work on both. [emoji106]

[bhorowitz]

Randy,
Do you make any that are appropriate for a 4S P or a 21 outrigger.
Regards,
Bob

[Randy Rapedius]

Randy,
Do you make any that are appropriate for a 4S P or a 21 outrigger.
Regards,
Bob

Not at this time. Sticking with Sport Hydros.

[Rookieboater]

Not at this time. Sticking with Sport Hydros.

I use his turn fin on a Gas Sport Hydro. Great Product!!!!!!!!

[Randy Rapedius]

I use his turn fin on a Gas Sport Hydro. Great Product!!!!!!!!

Thanks Robert.
Your FE fin will go out tomorrow. Usually takes 2-3 weeks coming from Canada.

[jaike5]

"guess I'm out of luck"
3 in 1 sport hydro fin , Interesting .
Randy Rap have you tested the 3 in 1 fin in PL, P, Q. Didn't know you were that into FE !
Will you be racing FE at the CANAM ?
J.

[Randy Rapedius]

"guess I'm out of luck"
3 in 1 sport hydro fin , Interesting .
Randy Rap have you tested the 3 in 1 fin in PL, P, Q. Didn't know you were that into FE !
Will you be racing FE at the CANAM ?
J.

They have been tested on PL and P with excellent results. I made the final design just slightly larger to accommodate Q.

[jaike5]

Excellent , just might check one out!
J.

[Brushless55]

Do these work for P-Sport Hydro?

[Randy Rapedius]

Do these work for P-Sport Hydro?

Yes, they work on P-Sport.

[Randy Rapedius]

Bout time you went FE, LOL

Your fin has been shipped. Usually takes 2-3 weeks coming from Canada. Thanks ... Randy

[Randy Rapedius]

Do you make any that are appropriate for a 4S P or a 21 outrigger.

Nothing for a rigger.
4s P Sport Hydro?