Tweet
Well, here it goes. Certainly never thought I’d be selling this one, but we need to catch up on expenses. This hull design is the current P-Sport IMPBA oval record holder and has many other national and local championship titles. It was designed to be stable in race water at full P power speeds, so it is slightly larger than the typical LSH size boat. 33-1/2” long. This particular one was built by me with no expenses spared.
Build thread:
https://forums.offshoreelectrics.com...017&highlight=
Features include a dedicated FE motor mount which is integrated into the framework (Aluminum motor mount plate included). Heavy duty, straight-pull 3mm steering linkage that is second to none. Zero slop with ball cup adjustment. Tapered air bleeds to increase venting underneath.
1. Hull and Hardware ONLY
2. Includes heavy duty turn fin bracket and brand new flex shaft which you will have to cut to length for your particular motor/collet set-up.
3. West Systems epoxy used exclusively
4. All joints are glassed
5. Stuffing tube meticulously glassed in place
6. Black Pearl Kit ($125)
7. KlassKote 2-part epoxy paint ($70)
8. Speedmaster strut ($23)
9. Speedmaster rudder ($40)
10. Servo ($40)
I had a tough time determining how much to ask for this one. Kit and material cost alone is just under $400. I’m asking $499 shipped.
Build thread:
https://forums.offshoreelectrics.com...017&highlight=
Features include a dedicated FE motor mount which is integrated into the framework (Aluminum motor mount plate included). Heavy duty, straight-pull 3mm steering linkage that is second to none. Zero slop with ball cup adjustment. Tapered air bleeds to increase venting underneath.
1. Hull and Hardware ONLY
2. Includes heavy duty turn fin bracket and brand new flex shaft which you will have to cut to length for your particular motor/collet set-up.
3. West Systems epoxy used exclusively
4. All joints are glassed
5. Stuffing tube meticulously glassed in place
6. Black Pearl Kit ($125)
7. KlassKote 2-part epoxy paint ($70)
8. Speedmaster strut ($23)
9. Speedmaster rudder ($40)
10. Servo ($40)
I had a tough time determining how much to ask for this one. Kit and material cost alone is just under $400. I’m asking $499 shipped.
Comment