Tweet
I’ve got these six (6) Neu 1412 motors up for sale. These motors do not fit any current NAMBA or IMPBA limited or spec classes for national rules in the books.
However, check with your local club as some are running their own rules for limited/spec classes with max motor dimensions of 37mm x 62mm. These motors WILL fit those rules. (These motors WILL also fit within the 268g weight limit being utilized by some clubs and at the IMPBA 2018 FE Nationals.)
These are special order motors since Neu typically puts the 1412 motors in a standard 1415 can which is 68.6mm long per spec drawings. But per their spec drawings the 1412 should be in a 61.0mm can. These motors have cans specifically machined to 61mm or less. These motors cost $229 from Neu and took extended time to get.
(2) 1412 / 2.5D / S / 5mm – (2050kv) - Measures 36.5mm x 55.2mm x 241g
(2) 1412 / 1.5Y / S / 5mm – (1850kv) - Measures 36.5mm x 55.2mm x 241g Both SOLD on Elite RC Boats
(2) 1412 / 3D / S / 5mm – (1650kv) - Measures 36.5mm x 61.0mm x 242g
Price = $170 each shipped within lower 48 United States.
PayPal Only. On other forums as well.
However, check with your local club as some are running their own rules for limited/spec classes with max motor dimensions of 37mm x 62mm. These motors WILL fit those rules. (These motors WILL also fit within the 268g weight limit being utilized by some clubs and at the IMPBA 2018 FE Nationals.)
These are special order motors since Neu typically puts the 1412 motors in a standard 1415 can which is 68.6mm long per spec drawings. But per their spec drawings the 1412 should be in a 61.0mm can. These motors have cans specifically machined to 61mm or less. These motors cost $229 from Neu and took extended time to get.
(2) 1412 / 2.5D / S / 5mm – (2050kv) - Measures 36.5mm x 55.2mm x 241g
(2) 1412 / 1.5Y / S / 5mm – (1850kv) - Measures 36.5mm x 55.2mm x 241g Both SOLD on Elite RC Boats
(2) 1412 / 3D / S / 5mm – (1650kv) - Measures 36.5mm x 61.0mm x 242g
Price = $170 each shipped within lower 48 United States.
PayPal Only. On other forums as well.
Comment