1/10th Scale

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • G.Rose
    Senior Member
    • Apr 2010
    • 643

    #1

    1/10th Scale

    I WAS HOLDING ON TO THIS BOAT JUST TO LOOK AT BECAUSE MY FIRST JOB WAS AT VALU-MART IN WA. $1.435 AN HR. IT WAS BUILT BY MARK BEATTY IN AND IS BIRH WOOD COVERED WITH 3OZ. F/B CLOTH. IT WEIGHS ONLY 4.3lbs WITH THE MOTOR, DUMMY MOTOR AND HARDWARE. I DRILLED OUT THE STRUT TO RUN BEARINGS AND WILL INCLUDE BEARINGS FOR THE STRUT AND NEWER DYNAMITE MOTOR. IT WILL NEED A DIGETAL SERVO AND RADIO. IT ALSO NEEDS A SPRING LOADED BALL CONNECTER ON THE 4-40 RODS HOLDING THE COWL DOWN IN THE STERN. THE BOAT IS EXTREMELY FAST AND LOVES R0UGH WATER. IT IS VERY NICE AND HAS BEEN RACED. I TRIED TO TAKE GOOD PICS TO BE REAL CLEAR. IF YOU WANT MORE PICS PM ME WITH YOUR EMAIL. THE DECK HAS 2 PLACES WHERE I WAS WORKING WITH CA GLUE AND IT GOT ON THE PAINT. I WOULD HAVE DONE MORE DAMAGE TRYING TO TAKE IT OFF SO I LEFT IT. I HAVE ABOUT [40] 1974 VALU-MART SEAFAIR BUTTONS THAT GO WITH IT.

    I WANT $275 U PAY FRT.
    Attached Files
  • G.Rose
    Senior Member
    • Apr 2010
    • 643

    #2
    Valu-mart 1/10th scale

    Very fast boat. Very light. THE COLOR PAINT IS THE EXACT COLOR CODE OF THE REAL BOAT
    $275 u pay frt
    Attached Files
    Last edited by G.Rose; 05-07-2018, 02:44 PM.

    Comment

    • G.Rose
      Senior Member
      • Apr 2010
      • 643

      #3
      thank you

      Comment

      • jakal
        Junior Member
        • Jun 2011
        • 21

        #4
        is it set up to turn right?
        is an esc included?
        is prop shaft and prop included?
        thanks

        jack

        Comment

        • G.Rose
          Senior Member
          • Apr 2010
          • 643

          #5
          I will include the aquacraft esc. If u pay $275. You would have to put the rudder on the port side and the turn fin would have to be put on the other sponson. It is a simple change. It is setup to go left. The shaft and prop are included. Extra bearings so you can keep the motor fresh and extra shaft bearings also. I have an old tactic radio and recv. I will throw in if u don't have a radio. The attenna is brokek but works great. The only thing u will need is a digetal servo and servo mount. Of course if u go to the right the prop i have will have to be changed to a standard rotation prop. [counter clock wise.
          Lmk

          Comment

          • jakal
            Junior Member
            • Jun 2011
            • 21

            #6
            I think I will pass on it. very nice boat though. thank you for the response.

            jack

            Comment

            • Moonie
              Senior Member
              • Jan 2014
              • 325

              #7
              Ill take it if you do $275 shipped.
              Gold Spilo

              Comment

              • namba123
                Senior Member
                • Mar 2018
                • 197

                #8
                What would be price if it was picked up?

                Comment

                • Moonie
                  Senior Member
                  • Jan 2014
                  • 325

                  #9
                  I’ll take it ether way.
                  Gold Spilo

                  Comment

                  • G.Rose
                    Senior Member
                    • Apr 2010
                    • 643

                    #10
                    Sold to Moonie

                    Comment

                    • G.Rose
                      Senior Member
                      • Apr 2010
                      • 643

                      #11
                      Antonio, Please let me know your understanding of my last PM. I am leaving for WA. in a few min. I don't want to pack these things for 4 months

                      Comment

                      Working...