Tweet
Sold my mono without the electronics so here they are for sale. Both I bought brand new. They say in the packages until I built the mono. First time it has been (and only time) was weekend before last when we went camping. I only ran them on 4s and while I don’t know the exact time I have on said units, I’d take a guess if maybe 20 minutes run time in very short spurts. You see, I was changing stit angles, battery placement and props. I’d run a quick lap around the pond and top og the bats and Check speed. Sorry for the novel.....just wanted to clarify.
Neu 1521 8mm shaft .75y 2050kv (was told by neu it’s 2050) $225 shipped with cooling jacket. Has 8mm connectors and I’ll include the matching connectors if you need them.
Mgm 25035-3 x2 lite esc
Peak current 300a
Continuous current 250a
2s to 8s
Data logging (I’ll include required cables and software is available on their website free)
No power switch
Water resistance
Water cooled heat sinks
Double power conductors
I added a cap bank and output wires for external bec. If you need a bec I have one I can include.
This esc costs about $400 with programming setup , I’ll let it all go for $300 shipped. This is probably the smoothest esc you’ll ever drive
Has 6.5mm castle batt connectors and 8mm motor connectors, will include matching other end of 8mm connectors if you need them. SOLD
Neu 1521 8mm shaft .75y 2050kv (was told by neu it’s 2050) $225 shipped with cooling jacket. Has 8mm connectors and I’ll include the matching connectors if you need them.
Mgm 25035-3 x2 lite esc
Peak current 300a
Continuous current 250a
2s to 8s
Data logging (I’ll include required cables and software is available on their website free)
No power switch
Water resistance
Water cooled heat sinks
Double power conductors
I added a cap bank and output wires for external bec. If you need a bec I have one I can include.
This esc costs about $400 with programming setup , I’ll let it all go for $300 shipped. This is probably the smoothest esc you’ll ever drive
Has 6.5mm castle batt connectors and 8mm motor connectors, will include matching other end of 8mm connectors if you need them. SOLD
Comment